FPF2104
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Number of Pins | 5 |
| Weight | 30mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 1996 |
| Series | IntelliMAX™ |
| JESD-609 Code | e4 |
| Feature | Auto Restart, Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Resistance | 160mOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Peripheral Drivers |
| Power Rating | 667mW |
| Max Power Dissipation | 667mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Current Rating | 800mA |
| Base Part Number | FPF2104 |
| Number of Outputs | 1 |
| Output Voltage | 6V |
| Output Type | P-Channel |
| Max Output Current | 400mA |
| Operating Supply Voltage | 5.5V |
| Voltage | 5.5V |
| Interface | On/Off |
| Current | 800mA |
| Output Configuration | High Side |
| Power Dissipation | 667mW |
| Output Current | 400mA |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Turn On Delay Time | 25 μs |
| Switch Type | General Purpose |
| Min Input Voltage | 1.8V |
| Max Input Voltage | 5.5V |
| Rise Time | 12μs |
| Fall Time (Typ) | 136 μs |
| Nominal Input Voltage | 5.5V |
| Turn-Off Delay Time | 50 μs |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 1.8V~5.5V |
| Driver Number of Bits | 1 |
| Min Current Limit | 400mA |
| Fault Protection | Current Limiting (Fixed), Over Temperature, UVLO |
| Output Peak Current Limit-Nom | 0.6A |
| Rds On (Typ) | 125m Ω |
| Drain to Source Resistance | 125mOhm |
| Built-in Protections | TRANSIENT; OVER CURRENT; THERMAL; UNDER VOLTAGE |
| Height | 1.25mm |
| Length | 3mm |
| Width | 1.7mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
FPF2104 Overview
As you can see, it's packaged in the way of a Tape & Reel (TR).It's included in the SC-74A, SOT-753 package.Surface Mount is the mounting type of the LED driver.A General Purpose switch type is owned by it.It is recommended that the temperature be set to -40°C~85°C TA for reliable performance.The LED driver has 1 outputs.A supply voltage of Not Required is required for it to operate.A maximum output voltage of P-Channel volts can be obtained with this LED driver.This LED driving board is equipped with Auto Restart, Status Flag features in order for it to be useful.It is part of the FPF2104 family of LED drivers.A total of 5 terminations can be found in it.The operation is performed through the 5 pins.It is important to note that the LED driving board has 1 functions.Maximum output current falls to 400mA when operation criteria are met.Using a voltage of 3.3V allows for high efficiency.In this case, it is mounted in the way of Surface Mount.It has 160mOhm resistance.A component of this type is included in the IntelliMAX? series.When this is the case, the output current is set to 400mA.Self-contained in an econtainer with a capacity of Peripheral Drivers, this LED driver is self-contained.In order to maximize efficiency, the supply voltage should be set to 5.5V.The maximum input voltage of the LED driver is 5.5V volts.There is a minimum input voltage of 1.8V volts for this LED driver.
FPF2104 Features
Supplied from 3.3V
Resistance of 160mOhm
FPF2104 Applications
There are a lot of ON Semiconductor FPF2104 Power Switches ICs applications.
- USB3.1 Power Delivery
- USB Protection
- Portable GPS
- USB Power Distribution
- PC Card Hot Swap
- Hot Swaps
- Wireless Modem Data Cards
- Gaming
- Hot Swap
- Solid-State Drives
