banner_page

FPF2105

P-Channel PMIC IntelliMAX? Series FPF2105 5 Pin 3.3V SC-74A, SOT-753


  • Manufacturer: ON Semiconductor
  • Nocochips NO: 598-FPF2105
  • Package: SC-74A, SOT-753
  • Datasheet: PDF
  • Stock: 671
  • Description: P-Channel PMIC IntelliMAX? Series FPF2105 5 Pin 3.3V SC-74A, SOT-753 (Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Lifecycle Status LAST SHIPMENTS (Last Updated: 1 week ago)
Mount Surface Mount
Mounting Type Surface Mount
Package / Case SC-74A, SOT-753
Number of Pins 5
Weight 30mg
Operating Temperature -40°C~85°C TA
Packaging Tape & Reel (TR)
Published 1996
Series IntelliMAX™
JESD-609 Code e4
Feature Auto Restart, Status Flag
Pbfree Code yes
Part Status Obsolete
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 5
ECCN Code EAR99
Resistance 160mOhm
Terminal Finish Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory Peripheral Drivers
Power Rating 667mW
Max Power Dissipation 667mW
Terminal Position DUAL
Terminal Form GULL WING
Number of Functions 1
Supply Voltage 3.3V
Current Rating 400mA
Base Part Number FPF2105
Number of Outputs 1
Output Voltage 6V
Output Type P-Channel
Operating Supply Voltage 5.5V
Voltage 5.5V
Interface On/Off
Current 800mA
Output Configuration High Side
Power Dissipation 667mW
Output Current 400mA
Voltage - Supply (Vcc/Vdd) Not Required
Input Type Non-Inverting
Switch Type General Purpose
Min Input Voltage 1.8V
Max Input Voltage 5.5V
Nominal Input Voltage 5.5V
Ratio - Input:Output 1:1
Voltage - Load 1.8V~5.5V
Driver Number of Bits 1
Min Current Limit 400mA
Fault Protection Current Limiting (Fixed), Over Temperature, UVLO
Output Peak Current Limit-Nom 0.6A
Rds On (Typ) 125m Ω
Drain to Source Resistance 125mOhm
Built-in Protections TRANSIENT; OVER CURRENT; THERMAL; UNDER VOLTAGE
Height 1.25mm
Length 3mm
Width 1.7mm
Radiation Hardening No
RoHS Status ROHS3 Compliant
Lead Free Lead Free

FPF2105 Overview


Tape & Reel (TR) is how it's packaged.It is included in the package SC-74A, SOT-753.The lighting driver is mounted in the Surface Mount position.There is a switch type of General Purpose.It is recommended to set the temperature to -40°C~85°C TA in order to ensure reliable operation.By default, it is set to output 1.In order to operate, it requires a voltage supply of Not Required.A maximum voltage of P-Channel volts is available from the output of this LED driver.The lighting driver has Auto Restart, Status Flag features.It belongs to the family FPF2105.A total of 5 terminations have been recorded.The 5 pins are used to operate the LED driver.The LED driving board has a total of 1 functions.With a supply voltage of 3.3V, high efficiency is possible.In this case, it is mounted in the way of Surface Mount.It has 160mOhm resistance.It is part of the IntelliMAX? series.This case results in a 400mA output current.A self-contained container with a capacity of Peripheral Drivers contains this lighting driver.It is recommended to set the supply voltage to 5.5V for optimum efficiency.The maximum input voltage is 5.5V volts.As far as input voltage goes, it has a minimum of 1.8V volts.

FPF2105 Features


Supplied from 3.3V
Resistance of 160mOhm

FPF2105 Applications


There are a lot of ON Semiconductor FPF2105 Power Switches ICs applications.

  • Notebook and Tablet Computers
  • Hot-Swap Systems
  • HDD, SSD
  • Hot Swap
  • Smart Phones, Feature Phones
  • Wireless Headsets
  • USB Protection
  • USB Power Distribution
  • Hot Swap
  • Mobile Communication Devices

Write a review

Note: HTML is not translated!
    Bad           Good