FPF2106
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Number of Pins | 5 |
| Weight | 30mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 1996 |
| Series | IntelliMAX™ |
| JESD-609 Code | e4 |
| Feature | Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Resistance | 160mOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Peripheral Drivers |
| Power Rating | 667mW |
| Max Power Dissipation | 667mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Current Rating | 800mA |
| Base Part Number | FPF2106 |
| Number of Outputs | 1 |
| Output Voltage | 6V |
| Output Type | P-Channel |
| Max Output Current | 400mA |
| Operating Supply Voltage | 5.5V |
| Voltage | 5.5V |
| Interface | On/Off |
| Current | 800mA |
| Output Configuration | High Side |
| Power Dissipation | 667mW |
| Output Current | 400mA |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Turn On Delay Time | 25 μs |
| Switch Type | General Purpose |
| Min Input Voltage | 1.8V |
| Max Input Voltage | 5.5V |
| Rise Time | 12μs |
| Fall Time (Typ) | 136 μs |
| Nominal Input Voltage | 5.5V |
| Turn-Off Delay Time | 50 μs |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 1.8V~5.5V |
| Driver Number of Bits | 1 |
| Min Current Limit | 400mA |
| Fault Protection | Current Limiting (Fixed), Over Temperature, UVLO |
| Output Peak Current Limit-Nom | 0.6A |
| Rds On (Typ) | 125m Ω |
| Drain to Source Resistance | 125mOhm |
| Built-in Protections | TRANSIENT; OVER CURRENT; THERMAL; UNDER VOLTAGE |
| Height | 1.25mm |
| Length | 3mm |
| Width | 1.7mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
FPF2106 Overview
Tape & Reel (TR) is how it's packaged.Package SC-74A, SOT-753 contains it.A Surface Mount mounting is used for the LED driving board.There is a General Purpose switch type associated with it.The temperature should be set to -40°C~85°C TA to ensure reliable functioning.By default, it is set to output 1.A voltage of Not Required is used to power it.Voltage output is P-Channel volts at maximum.A lighting driver with Status Flag features is available.It is a member of the FPF2106 family.A total of 5 terminations have been recorded.It is necessary to use the 5 pins in order to operate the LED driver.There are 1 functions of the LED driver.This operation requires the maximum output current to be decreased to 400mA.Using a voltage of 3.3V allows for high efficiency.As a result, it is mounted in the manner of Surface Mount.160mOhm is the resistance of the lighting driver.It belongs to the IntelliMAX? series.The output current is set to 400mA in this case.Self-contained LED driver with Peripheral Drivers capacity in an econtainer.In order to optimize the efficiency of the supply voltage, it should be set to 5.5V.Input voltage is limited to 5.5V volts.A minimum input voltage of 1.8V volts is required for this LED driver.
FPF2106 Features
Supplied from 3.3V
Resistance of 160mOhm
FPF2106 Applications
There are a lot of ON Semiconductor FPF2106 Power Switches ICs applications.
- HDD and SSD
- Set-top-box
- Solid State Drivers
- Hot Swap
- PDAs
- Smart Phones, Feature Phones
- Wireless/Networking Cards
- HDD, SSD
- Solid-State Drives
- USB Ports/Hubs
