Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 3 days ago) |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
SC-74A, SOT-753 |
Number of Pins |
5 |
Weight |
30mg |
Operating Temperature |
-40°C~85°C TA |
Packaging |
Tape & Reel (TR) |
Published |
1996 |
Series |
IntelliMAX™ |
JESD-609 Code |
e4 |
Feature |
Status Flag |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
5 |
Termination |
SMD/SMT |
ECCN Code |
EAR99 |
Resistance |
160mOhm |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Subcategory |
Peripheral Drivers |
Power Rating |
667mW |
Max Power Dissipation |
667mW |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Number of Functions |
1 |
Supply Voltage |
3.3V |
Current Rating |
400mA |
Base Part Number |
FPF2107 |
Number of Outputs |
1 |
Output Voltage |
6V |
Output Type |
P-Channel |
Max Output Current |
400mA |
Voltage |
5.5V |
Interface |
On/Off |
Current |
800mA |
Output Configuration |
High Side |
Power Dissipation |
667mW |
Output Current |
400mA |
Voltage - Supply (Vcc/Vdd) |
Not Required |
Input Type |
Non-Inverting |
Turn On Delay Time |
25 μs |
Switch Type |
General Purpose |
Min Input Voltage |
1.8V |
Max Input Voltage |
5.5V |
Rise Time |
12μs |
Fall Time (Typ) |
136 μs |
Turn-Off Delay Time |
50 μs |
Ratio - Input:Output |
1:1 |
Voltage - Load |
1.8V~5.5V |
Driver Number of Bits |
1 |
Min Current Limit |
400mA |
Fault Protection |
Current Limiting (Fixed), Over Temperature, UVLO |
Output Peak Current Limit-Nom |
0.6A |
Rds On (Typ) |
125m Ω |
Drain to Source Resistance |
125mOhm |
Built-in Protections |
TRANSIENT; OVER CURRENT; THERMAL; UNDER VOLTAGE |
Height |
1.25mm |
Length |
3mm |
Width |
1.7mm |
Radiation Hardening |
No |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
FPF2107 Overview
It's?packaged?in?the way?of?a?Tape & Reel (TR).There is a package for it in the SC-74A, SOT-753 package.The lighting driver is mounted in the Surface Mount position.There is a switch type of General Purpose.Keeping the temperature at -40°C~85°C TA ensures reliable operation.There is a default setting of 1 for output.With a supply voltage of Not Required, the LED driving board operates.A maximum output voltage of P-Channel volts has been specified.Status Flag features are available on the lighting driver.I believe it belongs to the FPF2107 family.It contains 5 terminations.For operation, 5 pins are used.As far as functions are concerned, the lighting driver has 1.This operation requires the maximum output current to be decreased to 400mA.With a supply voltage of 3.3V, high efficiency is possible.As a result, it is mounted in the manner of Surface Mount.Currently, the LED driving board has 160mOhm resistance.It is included in the IntelliMAX? series.This case results in a 400mA output current.A self-contained LED driver with a capacity of Peripheral Drivers is contained in an econtainer.Its maximum input voltage is 5.5V volts.Input voltage must be at least 1.8V volts.
FPF2107 Features
Supplied from 3.3V
Resistance of 160mOhm
FPF2107 Applications
There are a lot of ON Semiconductor FPF2107 Power Switches ICs applications.
- Storage (HDDs, SSDs)
- PDAs
- HDD, SSD
- Smart Phones, Feature Phones
- Solid State Drivers
- Solid-State Drives
- Notebook and Tablet Computers
- Wireless Modem Data Cards
- PC Cards
- Handheld Devices