Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 4 days ago) |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
SC-74A, SOT-753 |
Number of Pins |
5 |
Weight |
30mg |
Operating Temperature |
-40°C~85°C TA |
Packaging |
Tape & Reel (TR) |
Published |
1996 |
Series |
IntelliMAX™ |
JESD-609 Code |
e4 |
Feature |
Status Flag |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
5 |
ECCN Code |
EAR99 |
Resistance |
160mOhm |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Subcategory |
Peripheral Drivers |
Max Power Dissipation |
667mW |
Technology |
MOS |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Number of Functions |
1 |
Supply Voltage |
3.3V |
Current Rating |
400mA |
Base Part Number |
FPF2109 |
Number of Outputs |
1 |
Output Voltage |
6V |
Output Type |
P-Channel |
Max Output Current |
200mA |
Operating Supply Voltage |
5.5V |
Interface |
On/Off |
Output Configuration |
High Side |
Power Dissipation |
667mW |
Output Current |
200mA |
Voltage - Supply (Vcc/Vdd) |
Not Required |
Input Type |
Non-Inverting |
Turn On Delay Time |
25 μs |
Switch Type |
General Purpose |
Min Input Voltage |
1.8V |
Max Input Voltage |
5.5V |
Rise Time |
12μs |
Fall Time (Typ) |
136 μs |
Nominal Input Voltage |
5.5V |
Turn-Off Delay Time |
50 μs |
Ratio - Input:Output |
1:1 |
Voltage - Load |
1.8V~5.5V |
Driver Number of Bits |
1 |
Min Current Limit |
200mA |
Fault Protection |
Current Limiting (Fixed), Over Temperature, Reverse Current, UVLO |
Output Peak Current Limit-Nom |
0.3A |
Rds On (Typ) |
125m Ω |
Drain to Source Resistance |
125mOhm |
Built-in Protections |
TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
Height |
1.3mm |
Length |
3mm |
Width |
1.7mm |
Radiation Hardening |
No |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
FPF2109 Overview
Tape & Reel (TR) is how it's packaged.In the SC-74A, SOT-753 package, it is included.In this case, the LED driving board is mounted as Surface Mount.This switch is of type General Purpose.Keeping the temperature at -40°C~85°C TA ensures reliable operation.The LED driver has 1 outputs.The LED driving board operates at Not Required volts.A maximum output voltage of P-Channel volts can be obtained with this LED driver.As far as features are concerned, the LED driving board has Status Flag.The FPF2109 family contains this object.In total, there are 5 terminations.In order to operate, 5 pins are used.There are 1 functions of the LED driver.To comply with the operation criteria, the maximum output current is reduced to 200mA.A supply voltage of 3.3V leads to high efficiency.The lighting driver is mounted in the direction of Surface Mount.It has 160mOhm resistance.The IntelliMAX? series includes this electrical component.When this case is used, the output current is set to 200mA.There is a Peripheral Drivers capacity container for this LED driver that is self-contained.The supply voltage should be set at 5.5V for best efficiency.The maximum input voltage of the LED driver is 5.5V volts.Input voltage must be at least 1.8V volts.
FPF2109 Features
Supplied from 3.3V
Resistance of 160mOhm
FPF2109 Applications
There are a lot of ON Semiconductor FPF2109 Power Switches ICs applications.
- USB3.1 Power Delivery
- Wireless Headsets
- Hot Swap
- Notebook and Tablet Computers
- Telecom and Network Systems
- Mobile Communication Devices
- Portable Music Players
- USB Ports/Hubs
- Portable GPS Device
- Wireless Modem Data Cards