FPF2110
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Number of Pins | 5 |
| Weight | 30mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 1996 |
| Series | IntelliMAX™ |
| JESD-609 Code | e4 |
| Feature | Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Resistance | 160MOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Peripheral Drivers |
| Power Rating | 667mW |
| Max Power Dissipation | 667mW |
| Technology | MOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Current Rating | 400mA |
| Base Part Number | FPF2110 |
| Number of Outputs | 1 |
| Output Voltage | 6V |
| Output Type | P-Channel |
| Operating Supply Voltage | 5.5V |
| Voltage | 5.5V |
| Interface | On/Off |
| Current | 800mA |
| Output Configuration | High Side |
| Power Dissipation | 667mW |
| Output Current | 400mA |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Min Input Voltage | 1.8V |
| Max Input Voltage | 5.5V |
| Nominal Input Voltage | 5.5V |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 1.8V~5.5V |
| Driver Number of Bits | 1 |
| Min Current Limit | 400mA |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Reverse Current, UVLO |
| Output Peak Current Limit-Nom | 0.6A |
| Rds On (Typ) | 125m Ω |
| Drain to Source Resistance | 125mOhm |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
| Height | 1.25mm |
| Length | 3mm |
| Width | 1.7mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
FPF2110 Overview
It is packaged in the form of a Tape & Reel (TR).It is included with the SC-74A, SOT-753 package as well.The lighting driver has the mounting type Surface Mount.The switch type of this switch is General Purpose.The temperature should be set to -40°C~85°C TA to ensure reliable functioning.As a default, the output is set to 1.In order to operate, it requires a voltage supply of Not Required.A maximum output voltage of P-Channel volts can be achieved by this LED driver.As far as features are concerned, the LED driving board has Status Flag.I believe it belongs to the FPF2110 family.A total of 5 terminations have been found in it.The operation is carried out using the 5 pins.It consists of 1 functions.A supply voltage of 3.3V leads to high efficiency.This lighting driver is mounted in the way of Surface Mount.Currently, the LED driving board has 160MOhm resistance.It is included in the IntelliMAX? series.In this case, the output current will be set to 400mA.The LED driver is self-contained in an econtainer with Peripheral Drivers capacity.The supply voltage should be set at 5.5V for best efficiency.The maximum input voltage is 5.5V volts.It requires 1.8V volts as the minimum input voltage.
FPF2110 Features
Supplied from 3.3V
Resistance of 160MOhm
FPF2110 Applications
There are a lot of ON Semiconductor FPF2110 Power Switches ICs applications.
- Hot Swaps
- PC Cards
- Smartphone and PDA
- Storage (HDDs, SSDs)
- Low Voltage I/O System Power
- USB Ports/Hubs
- Wireless Headsets
- Hot Swap
- Handheld Devices
- Portable GPS Device
