FPF2123
| Parameters | |
|---|---|
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Number of Pins | 5 |
| Weight | 30mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2008 |
| Series | IntelliMAX™ |
| JESD-609 Code | e4 |
| Feature | Auto Restart |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Resistance | 125mOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Peripheral Drivers |
| Max Power Dissipation | 667mW |
| Technology | MOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Current Rating | 1A |
| Base Part Number | FPF2123 |
| Number of Outputs | 1 |
| Output Voltage | 6V |
| Output Type | P-Channel |
| Max Output Current | 1.5A |
| Operating Supply Voltage | 5.5V |
| Interface | On/Off |
| Output Configuration | High Side |
| Power Dissipation | 667mW |
| Output Current | 600mA |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Turn On Delay Time | 25 μs |
| Switch Type | General Purpose |
| Min Input Voltage | 1.8V |
| Max Input Voltage | 5.5V |
| Nominal Input Voltage | 5.5V |
| Turn-Off Delay Time | 70 μs |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 1.8V~5.5V |
| Driver Number of Bits | 1 |
| Min Current Limit | 150mA |
| Fault Protection | Current Limiting (Adjustable), Over Temperature, Reverse Current, UVLO |
| Output Peak Current Limit-Nom | 0.8A |
| Rds On (Typ) | 125m Ω |
| Built-in Protections | OVER CURRENT; THERMAL; UNDER VOLTAGE |
| Length | 2.9mm |
| Radiation Hardening | No |
FPF2123 Overview
Tape & Reel (TR) is how it's packaged.The SC-74A, SOT-753 package includes it.The lighting driver is mounted in the Surface Mount position.There is a General Purpose switch type associated with it.The temperature should be set to -40°C~85°C TA to ensure reliable functioning.In this LED driver, there are no outputs available.It uses a supply voltage of Not Required to operate.A maximum voltage of P-Channel volts is available from the output of this LED driver.There are Auto Restart features available on the LED driving board.It belongs to the FPF2123 family.It contains 5 terminations.The 5 pins are used for the operation of the system.As far as the lighting driver is concerned, there are 1 functions.To comply with the operation criteria, the maximum output current is reduced to 1.5A.The supply voltage can be 3.3V for high efficiency.This lighting driver is mounted in the way of Surface Mount.The LED driver has 125mOhm resistance.This electrical component can be found in the IntelliMAX? series.This case has the output current set to 600mA.A container with a capacity of Peripheral Drivers contains this self-contained lighting driver.It is recommended to set the supply voltage to 5.5V for optimum efficiency.Its maximum input voltage is 5.5V volts.Input voltage must be at least 1.8V volts.
FPF2123 Features
Supplied from 3.3V
Resistance of 125mOhm
FPF2123 Applications
There are a lot of ON Semiconductor FPF2123 Power Switches ICs applications.
- HDD and SSD
- Set-top-box
- Set-Top Boxes
- Hard Disk Drives
- Low Voltage I/O System Power
- Smartphone and PDA
- Storage (HDDs, SSDs)
- Portable GPS
- Portable Devices
- Wearable Devices
