FPF2124
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Number of Pins | 5 |
| Weight | 30mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Cut Tape (CT) |
| Published | 2008 |
| Series | IntelliMAX™ |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Resistance | 125mOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Peripheral Drivers |
| Max Power Dissipation | 667mW |
| Technology | MOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Current Rating | 1A |
| Base Part Number | FPF2124 |
| Number of Outputs | 1 |
| Output Voltage | 6V |
| Output Type | P-Channel |
| Max Output Current | 1.5A |
| Operating Supply Voltage | 5.5V |
| Interface | On/Off |
| Output Configuration | High Side |
| Power Dissipation | 667mW |
| Output Current | 600mA |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Turn On Delay Time | 25 μs |
| Switch Type | General Purpose |
| Min Input Voltage | 1.8V |
| Max Input Voltage | 5.5V |
| Rise Time | 12μs |
| Fall Time (Typ) | 200 μs |
| Nominal Input Voltage | 5.5V |
| Turn-Off Delay Time | 70 μs |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 1.8V~5.5V |
| Driver Number of Bits | 1 |
| Min Current Limit | 150mA |
| Fault Protection | Current Limiting (Adjustable), Over Temperature, Reverse Current, UVLO |
| Output Peak Current Limit-Nom | 0.8A |
| Rds On (Typ) | 125m Ω |
| Built-in Protections | OVER CURRENT; THERMAL; UNDER VOLTAGE |
| Length | 2.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
FPF2124 Overview
A Cut Tape (CT) is used to package it.The SC-74A, SOT-753 package contains it.Mounting type Surface Mount is selected for the LED driving board.There is a switch type of General Purpose.It is recommended to set the temperature to -40°C~85°C TA in order to ensure reliable operation.By default, it is set to output 1.The LED driving board operates at Not Required volts.There is a maximum output voltage of P-Channel volts on this LED driver.It is a member of the FPF2124 family.In total, there are 5 terminations.The operation is performed through the 5 pins.It contains 1 functions.In order to meet the operation criteria, the maximum output current drops to 1.5A.The supply voltage of 3.3V is conducive to high efficiency.It is mounted in the way of Surface Mount.In this case, there is 125mOhm resistance in the LED driving board.This electrical component is included in the IntelliMAX? series.In this case, the output current will be set to 600mA.A self-contained container with a capacity of Peripheral Drivers contains this lighting driver.When using this LED driving board, it is recommended that the supply voltage is set to 5.5V.Voltage input is limited to 5.5V volts.As far as input voltage goes, it has a minimum of 1.8V volts.
FPF2124 Features
Supplied from 3.3V
Resistance of 125mOhm
FPF2124 Applications
There are a lot of ON Semiconductor FPF2124 Power Switches ICs applications.
- Smartphone and PDA
- Portable/Handheld Devices
- USB3.1 Power Delivery
- Wireless Headsets
- Notebook PC
- Hard Disk Drives
- Wireless Modem Data Cards
- Solid-State Drives
- Portable GPS
- USB Power Distribution
