FPF2142
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 6-VDFN Exposed Pad |
| Number of Pins | 6 |
| Weight | 30mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2016 |
| Feature | Power Good, Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Resistance | 120mOhm |
| Terminal Finish | Nickel/Gold/Palladium/Silver (Ni/Au/Pd/Ag) |
| Subcategory | Peripheral Drivers |
| Max Power Dissipation | 1.2W |
| Terminal Position | DUAL |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | FPF2142 |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Output Type | P-Channel |
| Operating Supply Voltage | 5.5V |
| Interface | On/Off |
| Output Configuration | High Side |
| Output Current | 200mA |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Min Input Voltage | 1.8V |
| Max Input Voltage | 5.5V |
| Nominal Input Voltage | 5.5V |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 1.8V~5.5V |
| Driver Number of Bits | 1 |
| Min Current Limit | 200mA |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Reverse Current, UVLO |
| Output Peak Current Limit-Nom | 0.3A |
| Rds On (Typ) | 120m Ω |
| Built-in Protections | TRANSIENT; OVER CURRENT; THERMAL; UNDER VOLTAGE |
| Height Seated (Max) | 0.8mm |
| Length | 2mm |
| Width | 2mm |
| RoHS Status | ROHS3 Compliant |
FPF2142 Overview
The LED driver's packaged as a Tape & Reel (TR).In the 6-VDFN Exposed Pad package, it is included.Mounting type Surface Mount is selected for the LED driving board.It owns the General Purpose switch type.It is recommended that the temperature be set to -40°C~85°C TA for reliable performance.As a default, the output is set to 1.The LED driving board operates with a supply voltage of Not Required.The maximum output voltage of this LED driver is P-Channel volts.In terms of features, the LED driving board has Power Good, Status Flag.The FPF2142 family contains this object.As a result, there are 6 terminations.The 6 pins are used to operate the LED driver.The LED driver has 1 functions.High efficiency is possible at 3.3V supply voltage.This lighting driver is mounted in the way of Surface Mount.120mOhm resistance is present in the lighting driver.This results in a 200mA output current.A container with a capacity of Peripheral Drivers contains this self-contained lighting driver.For maximum efficiency, the supply voltage should be set to 5.5V.Input voltage is limited to 5.5V volts.The input voltage minimum is 1.8V volts.
FPF2142 Features
Supplied from 3.3V
Resistance of 120mOhm
FPF2142 Applications
There are a lot of ON Semiconductor FPF2142 Power Switches ICs applications.
- USB Power Distribution
- USB3.1 Power Delivery
- Notebook PC
- PDAs
- Storage Drives
- USB Ports/Hubs
- Portable Music Players
- Solid-State Drives
- USB Power Distribution
- Wearable Devices
