FPF2143
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 6-VDFN Exposed Pad |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Feature | Power Good, Status Flag |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| Terminal Finish | NICKEL PALLADIUM GOLD |
| Terminal Position | DUAL |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 6 |
| JESD-30 Code | S-XDSO-N6 |
| Number of Outputs | 1 |
| Qualification Status | COMMERCIAL |
| Output Type | P-Channel |
| Supply Voltage-Max (Vsup) | 5.5V |
| Interface | On/Off |
| Current - Output (Max) | 200mA |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 1.8V~5.5V |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Reverse Current, UVLO |
| Output Peak Current Limit-Nom | 0.3A |
| Rds On (Typ) | 120m Ω |
| Built-in Protections | TRANSIENT; OVER CURRENT; THERMAL; UNDER VOLTAGE |
| Output Current Flow Direction | SINK |
| Height Seated (Max) | 0.8mm |
| Length | 2mm |
| Width | 2mm |
| RoHS Status | ROHS3 Compliant |
FPF2143 Overview
Tape & Reel (TR) is how it's packaged.It's included in the 6-VDFN Exposed Pad package.The LED driver is mounted as Surface Mount.It owns General Purpose switch type.It is recommended that the temperature be set to -40°C~85°C TA for reliable performance.It is possible to use 1 outputs in the lighting driver.A supply voltage of Not Required is required for it to operate.A maximum output voltage of P-Channel volts can be achieved by this LED driver.The lighting driver has Power Good, Status Flag features.A total of 6 terminations can be found in it.It consists of 1 functions.There is a maximum output of 200mAV from the LED driver.It is possible to achieve a high level of efficiency with a supply voltage of 3.3V.A total of 6 pins are present on it.In this case, Vsup (maximum supply voltage) is set to 5.5V.
FPF2143 Features
Supplied from 3.3V
FPF2143 Applications
There are a lot of Rochester Electronics, LLC FPF2143 Power Switches ICs applications.
- USB3.1 Power Delivery
- Hot Swaps
- Storage Drives
- Wireless Modem Data Cards
- Solid-State Drives
- Hard Disk Drives
- Portable/Handheld Devices
- Hot Swap
- USB Ports/Hubs
- Gaming
