banner_page

FPF2143

P-Channel PMIC FPF2143 6 Pin 3.3V 6-VDFN Exposed Pad


  • Manufacturer: ON Semiconductor
  • Nocochips NO: 598-FPF2143
  • Package: 6-VDFN Exposed Pad
  • Datasheet: PDF
  • Stock: 488
  • Description: P-Channel PMIC FPF2143 6 Pin 3.3V 6-VDFN Exposed Pad (Kg)

Details

Tags

Parameters
Lifecycle Status LAST SHIPMENTS (Last Updated: 4 days ago)
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 6-VDFN Exposed Pad
Number of Pins 6
Weight 30mg
Operating Temperature -40°C~85°C TA
Packaging Tape & Reel (TR)
Published 1996
Feature Power Good, Status Flag
Pbfree Code yes
Part Status Obsolete
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 6
ECCN Code EAR99
Resistance 120mOhm
Terminal Finish Nickel/Gold/Palladium/Silver (Ni/Au/Pd/Ag)
Subcategory Peripheral Drivers
Power Rating 1.2W
Max Power Dissipation 1.2W
Terminal Position DUAL
Terminal Form NO LEAD
Peak Reflow Temperature (Cel) NOT SPECIFIED
Number of Functions 1
Supply Voltage 3.3V
Time@Peak Reflow Temperature-Max (s) NOT SPECIFIED
Base Part Number FPF2143
Number of Outputs 1
Qualification Status Not Qualified
Output Type P-Channel
Voltage 5.5V
Interface On/Off
Current 400mA
Output Configuration High Side
Power Dissipation 1.2W
Output Current 200mA
Voltage - Supply (Vcc/Vdd) Not Required
Input Type Non-Inverting
Switch Type General Purpose
Min Input Voltage 1.8V
Max Input Voltage 5.5V
Nominal Input Voltage 5.5V
Ratio - Input:Output 1:1
Voltage - Load 1.8V~5.5V
Driver Number of Bits 1
Min Current Limit 200mA
Fault Protection Current Limiting (Fixed), Over Temperature, Reverse Current, UVLO
Output Peak Current Limit-Nom 0.3A
Rds On (Typ) 120m Ω
Built-in Protections TRANSIENT; OVER CURRENT; THERMAL; UNDER VOLTAGE
Height 750μm
Length 2mm
Width 2mm
RoHS Status RoHS Compliant

FPF2143 Overview


It is packaged in the manner of a Tape & Reel (TR).The 6-VDFN Exposed Pad package includes it.Mounting type Surface Mount is selected for the LED driving board.A General Purpose switch type is owned by it.Keeping the temperature at -40°C~85°C TA ensures reliable operation.The LED driver has 1 outputs.Operation is based on a supply voltage of Not Required.A maximum output voltage of P-Channel volts can be obtained with this LED driver.In terms of features, the LED driving board has Power Good, Status Flag.It is part of the FPF2143 family of LED drivers.A total of 6 terminations can be found in it.In order to operate, the 6 pins are used.It is important to note that the LED driving board has 1 functions.With a supply voltage of 3.3V, high efficiency is possible.Surface Mount is mounted in the way of this lighting driver.Lighting drivers with 120mOhm resistance are used.The output current is set to 200mA in this case.A self-contained container with a capacity of Peripheral Drivers contains this lighting driver.Input voltage is limited to 5.5V volts.The input voltage minimum is 1.8V volts.

FPF2143 Features


Supplied from 3.3V
Resistance of 120mOhm

FPF2143 Applications


There are a lot of ON Semiconductor FPF2143 Power Switches ICs applications.

  • Hard Disk Drives
  • Low Voltage I/O System Power
  • Hot Swap
  • HDD and SSD
  • Smart Phones, Feature Phones
  • USB3.1 Power Delivery
  • Portable GPS Device
  • USB Power Distribution
  • Wireless/Networking Cards
  • Solid-State Drives

Write a review

Note: HTML is not translated!
    Bad           Good