FPF2144
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 6-VDFN Exposed Pad |
| Number of Pins | 6 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Feature | Auto Restart, Power Good, Status Flag |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Resistance | 120mOhm |
| Max Power Dissipation | 1.2W |
| Base Part Number | FPF2144 |
| Number of Outputs | 1 |
| Output Type | P-Channel |
| Max Output Current | 400mA |
| Operating Supply Voltage | 5.5V |
| Interface | On/Off |
| Output Configuration | High Side |
| Output Current | 400mA |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Min Input Voltage | 1.8V |
| Max Input Voltage | 5.5V |
| Nominal Input Voltage | 5.5V |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 1.8V~5.5V |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Reverse Current, UVLO |
| Rds On (Typ) | 120m Ω |
| RoHS Status | RoHS Compliant |
FPF2144 Overview
As a result, it is packaged in the form of a Tape & Reel (TR).There is a 6-VDFN Exposed Pad package that includes it.This LED driving board is mounted using the mounting type Surface Mount.General Purpose is the switch type it owns.Ensure reliable operation by setting the temperature to -40°C~85°C TA.The lighting driver has a total of 1 outputs that are available for use.Operation is based on Not Required supply voltage.It produces a maximum output voltage of P-Channel volts at its maximum output.There are Auto Restart, Power Good, Status Flag features available on the LED driving board.It belongs to the family FPF2144.For operation, 6 pins are used.The maximum output current drops to 400mA in order to meet the operation criteria.The lighting driver is mounted in the direction of Surface Mount.It has a resistance of 120mOhm.In this case, the output current is set to 400mA.In order to optimize the efficiency of the supply voltage, it should be set to 5.5V.As far as input voltage goes, its maximum is 5.5V volts.There is a minimum input voltage of 1.8V volts for this LED driver.
FPF2144 Features
Resistance of 120mOhm
FPF2144 Applications
There are a lot of ON Semiconductor FPF2144 Power Switches ICs applications.
- Wireless/Networking Cards
- Portable GPS Device
- Set-Top Boxes
- Set-top-box
- PC Cards
- Portable/Handheld Devices
- Solid-State Drives
- Telecom and Network Systems
- Smartphone and PDA
- USB Power Distribution
