FPF2147
| Parameters | |
|---|---|
| Lifecycle Status | LAST SHIPMENTS (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 6-VDFN Exposed Pad |
| Number of Pins | 6 |
| Weight | 30mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2016 |
| Feature | Power Good, Status Flag |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Resistance | 120mOhm |
| Terminal Finish | Nickel/Gold/Palladium/Silver (Ni/Au/Pd/Ag) |
| Subcategory | Peripheral Drivers |
| Max Power Dissipation | 1.2W |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Current Rating | 400mA |
| Base Part Number | FPF2147 |
| Number of Outputs | 1 |
| Output Type | P-Channel |
| Max Output Current | 400mA |
| Voltage | 5.5V |
| Interface | On/Off |
| Current | 400mA |
| Output Configuration | High Side |
| Power Dissipation | 1.2W |
| Output Current | 400mA |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Min Input Voltage | 1.8V |
| Max Input Voltage | 5.5V |
| Nominal Input Voltage | 5.5V |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 1.8V~5.5V |
| Driver Number of Bits | 1 |
| Min Current Limit | 400mA |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Reverse Current, UVLO |
| Output Peak Current Limit-Nom | 0.6A |
| Rds On (Typ) | 120m Ω |
| Built-in Protections | TRANSIENT; OVER CURRENT; THERMAL; UNDER VOLTAGE |
| Height | 725μm |
| Length | 2mm |
| Width | 2mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
FPF2147 Overview
The package is in the form of a Tape & Reel (TR).It is included in the package 6-VDFN Exposed Pad.This LED driving board is mounted using the mounting type Surface Mount.The switch type is General Purpose.Keeping the temperature at -40°C~85°C TA ensures reliable operation.The LED driver has a total of 1 outputs.In order to operate, it requires a voltage supply of Not Required.It produces a maximum output voltage of P-Channel volts at its maximum output.It has a total of Power Good, Status Flag features.The FPF2147 family contains this object.As a result, there are 6 terminations.It is necessary to use the 6 pins in order to operate the LED driver.It has 1 functions.To comply with the operation criteria, the maximum output current is reduced to 400mA.With a supply voltage of 3.3V, high efficiency is possible.It is positioned in the direction of Surface Mount.Lighting drivers with 120mOhm resistance are used.As a result, the output current is set to 400mA.Self-contained in an econtainer with a capacity of Peripheral Drivers, this LED driver is self-contained.Input voltage is limited to 5.5V volts.A minimum input voltage of 1.8V volts is required for this LED driver.
FPF2147 Features
Supplied from 3.3V
Resistance of 120mOhm
FPF2147 Applications
There are a lot of ON Semiconductor FPF2147 Power Switches ICs applications.
- Portable GPS Device
- USB Power Distribution
- Hot-Swap Systems
- Portable Music Players
- Gaming
- Wireless/Networking Cards
- Low Voltage I/O System Power
- Portable GPS
- USB Protection
- Wireless Headsets
