FPF2164
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 6-WDFN Exposed Pad |
| Number of Pins | 6 |
| Weight | 30mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 1996 |
| JESD-609 Code | e4 |
| Feature | Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Resistance | 160MOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Power Rating | 1.2W |
| Max Power Dissipation | 1.2W |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Base Part Number | FPF2164 |
| Number of Outputs | 1 |
| Output Type | P-Channel |
| Max Output Current | 1.5A |
| Number of Channels | 1 |
| Voltage | 5.5V |
| Interface | On/Off |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Current | 1A |
| Output Configuration | High Side |
| Power Dissipation | 1.2W |
| Output Current | 150mA |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Adjustable Threshold | YES |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Min Input Voltage | 1.8V |
| Max Input Voltage | 5.5V |
| Nominal Input Voltage | 5.5V |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 1.8V~5.5V |
| Min Current Limit | 150mA |
| Fault Protection | Current Limiting (Adjustable), Over Temperature, Reverse Current, UVLO |
| Rds On (Typ) | 120m Ω |
| Height | 750μm |
| Length | 2mm |
| Width | 2mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
FPF2164 Overview
The LED driver's packaged as a Tape & Reel (TR).The 6-WDFN Exposed Pad package includes it.In this case, the LED driving board is mounted as Surface Mount.It owns General Purpose switch type.To ensure reliable performance, the temperature should be set to -40°C~85°C TA.The lighting driver has a total of 1 outputs that are available for use.Operation is based on a supply voltage of Not Required.The maximum output voltage of this LED driver is P-Channel volts.In terms of features, the LED driving board has Status Flag.I believe it belongs to the FPF2164 family.It consists of 6 terminations in total.The operation is performed through the 6 pins.It contains 1 functions.This operation requires the maximum output current to be decreased to 1.5A.High efficiency is possible at 3.3V supply voltage.Surface Mount is mounted in the way of this lighting driver.Lighting drivers with 160MOhm resistance are used.When this is the case, the output current is set to 150mA.There is an analog input IC in this gadget, which is POWER SUPPLY SUPPORT CIRCUIT.To choose from, there are 1 channels.This LED driving board can accept voltages up to 5.5V volts as an input.As a minimum input voltage, it requires 1.8V volts.
FPF2164 Features
Supplied from 3.3V
Resistance of 160MOhm
1 channels
FPF2164 Applications
There are a lot of ON Semiconductor FPF2164 Power Switches ICs applications.
- Storage Drives
- Set-Top Boxes
- Portable/Handheld Devices
- Wireless/Networking Cards
- Hot Swap
- USB Power Distribution
- Set-top-box
- Portable GPS Device
- Hot-Swap Systems
- USB Ports/Hubs
