FPF2165
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 6-WDFN Exposed Pad |
| Number of Pins | 6 |
| Weight | 30mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 1996 |
| Feature | Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Resistance | 180mOhm |
| Terminal Finish | Nickel/Gold/Palladium/Silver (Ni/Au/Pd/Ag) |
| Power Rating | 1.2W |
| Max Power Dissipation | 1.2W |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Base Part Number | FPF2165 |
| Number of Outputs | 1 |
| Output Type | P-Channel |
| Max Output Current | 1.5A |
| Number of Channels | 1 |
| Voltage | 5.5V |
| Interface | On/Off |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Current | 1.5A |
| Output Configuration | High Side |
| Power Dissipation | 1.2W |
| Output Current | 150mA |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Adjustable Threshold | YES |
| Input Type | Non-Inverting |
| Turn On Delay Time | 25 μs |
| Switch Type | General Purpose |
| Min Input Voltage | 1.8V |
| Max Input Voltage | 5.5V |
| Nominal Input Voltage | 5.5V |
| Turn-Off Delay Time | 45 μs |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 1.8V~5.5V |
| Min Current Limit | 150mA |
| Fault Protection | Current Limiting (Adjustable), Over Temperature, Reverse Current, UVLO |
| Rds On (Typ) | 120m Ω |
| Height | 750μm |
| Length | 2mm |
| Width | 2mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
FPF2165 Overview
As you can see, it's packaged in the way of a Tape & Reel (TR).It's included in the 6-WDFN Exposed Pad package.The LED driver is mounted as Surface Mount.A General Purpose switch type is owned by it.To ensure reliable performance, the temperature should be set to -40°C~85°C TA.It is possible to use 1 outputs in the lighting driver.A voltage of Not Required is used to power it.The maximum output voltage is P-Channel volts.It has a total of Status Flag features.It belongs to the family FPF2165.In total, there are 6 terminations.It is necessary to use the 6 pins in order to operate the LED driver.It contains 1 functions.The maximum output current drops to 1.5A in order to meet the operation criteria.Supply voltages of 3.3V allow for high efficiency.It is mounted in the way of Surface Mount.The LED driver has 180mOhm resistance.This case results in a 150mA output current.In this lighting driver, POWER SUPPLY SUPPORT CIRCUIT is the analog IC.A total of 1 channels are available for you to choose from.As far as input voltage goes, its maximum is 5.5V volts.It requires 1.8V volts as the minimum input voltage.
FPF2165 Features
Supplied from 3.3V
Resistance of 180mOhm
1 channels
FPF2165 Applications
There are a lot of ON Semiconductor FPF2165 Power Switches ICs applications.
- Notebook and Tablet Computers
- Portable Music Players
- Handheld Devices
- Gaming
- Portable GPS Device
- PDAs
- Hot Swaps
- Storage (HDDs, SSDs)
- USB Power Distribution
- Storage Drives
