FPF2172
| Parameters | |
|---|---|
| Min Current Limit | 200mA |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Reverse Current, UVLO |
| Output Peak Current Limit-Nom | 0.3A |
| Rds On (Typ) | 125m Ω |
| Built-in Protections | TRANSIENT; OVER CURRENT; THERMAL; UNDER VOLTAGE |
| Height Seated (Max) | 0.8mm |
| Length | 3mm |
| Width | 3mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
| Lifecycle Status | LAST SHIPMENTS (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 6-WDFN Exposed Pad |
| Number of Pins | 6 |
| Weight | 25mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2016 |
| Series | IntelliMAX™ |
| JESD-609 Code | e4 |
| Feature | Status Flag |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Resistance | 125mOhm |
| Terminal Finish | Nickel/Palladium/Gold/Silver (Ni/Pd/Au/Ag) |
| Subcategory | Peripheral Drivers |
| Max Power Dissipation | 1.4W |
| Terminal Position | DUAL |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.95mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | FPF2172 |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Output Voltage | 6V |
| Output Type | P-Channel |
| Max Output Current | 200mA |
| Power Supplies | 2/5V |
| Interface | On/Off |
| Nominal Supply Current | 110μA |
| Output Configuration | High Side |
| Power Dissipation | 1.4W |
| Output Current | 200mA |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Turn On Delay Time | 22 μs |
| Switch Type | General Purpose |
| Min Input Voltage | 1.8V |
| Max Input Voltage | 5.5V |
| Turn-Off Delay Time | 20 μs |
| Continuous Drain Current (ID) | 300mA |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 1.8V~5.5V |
| Driver Number of Bits | 1 |
FPF2172 Overview
It's?packaged?in?the way?of?a?Tape & Reel (TR).Package 6-WDFN Exposed Pad contains it.A Surface Mount mounting is used for the LED driving board.This switch is of type General Purpose.Ensure reliable operation by setting the temperature to -40°C~85°C TA.By default, it is set to output 1.The LED driving board operates at Not Required volts.It produces a maximum output voltage of P-Channel volts at its maximum output.In terms of features, the LED driving board has Status Flag.It belongs to the FPF2172 family.A total of 6 terminations can be found in it.It is necessary to use the 6 pins in order to operate the LED driver.The LED driver has 1 functions.Maximum output current falls to 200mA when operation criteria are met.Using a voltage of 3.3V allows for high efficiency.This lighting driver is mounted in the way of Surface Mount.The LED driver has 125mOhm resistance.It belongs to the IntelliMAX? series.In this case, the output current is set to 200mA.A self-contained econtainer holding Peripheral Drivers capacity contains this lighting driver.It has a power supply of 2/5V.Input voltage is limited to 5.5V volts.As a minimum input voltage, it requires 1.8V volts.
FPF2172 Features
Supplied from 3.3V
Resistance of 125mOhm
FPF2172 Applications
There are a lot of ON Semiconductor FPF2172 Power Switches ICs applications.
- Portable GPS Device
- Wireless Headsets
- Portable/Handheld Devices
- Telecom and Network Systems
- PC Cards
- Portable Music Players
- Storage Drives
- Various applications equipped with buttons
- Mobile Communication Devices
- Smartphone and PDA
