FPF2174
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 6-WDFN Exposed Pad |
| Number of Pins | 6 |
| Weight | 25mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Series | IntelliMAX™ |
| JESD-609 Code | e4 |
| Feature | Status Flag |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold/Silver (Ni/Pd/Au/Ag) |
| Subcategory | Peripheral Drivers |
| Max Power Dissipation | 1.4W |
| Terminal Position | DUAL |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.95mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | FPF2174 |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Output Type | P-Channel |
| Interface | On/Off |
| Output Configuration | High Side |
| Power Dissipation | 1.4W |
| Output Current | 200mA |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Min Input Voltage | 1.8V |
| Max Input Voltage | 5.5V |
| Rise Time | 14μs |
| Fall Time (Typ) | 126 μs |
| Nominal Input Voltage | 5.5V |
| Continuous Drain Current (ID) | 400mA |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 1.8V~5.5V |
| Driver Number of Bits | 1 |
| Min Current Limit | 200mA |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Reverse Current, UVLO |
| Dual Supply Voltage | 5.5V |
| Turn On Time | 50 µs |
| Output Peak Current Limit-Nom | 0.3A |
| Rds On (Typ) | 125m Ω |
| Turn Off Time | 40 µs |
| Built-in Protections | TRANSIENT; OVER CURRENT; THERMAL; UNDER VOLTAGE |
| Height Seated (Max) | 0.8mm |
| Length | 3mm |
| Width | 3mm |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
FPF2174 Overview
It is package in Tape & Reel (TR) case.Package 6-WDFN Exposed Pad contains it.This LED driving board is mounted using the mounting type Surface Mount.It owns General Purpose switch type.To ensure reliable performance, the temperature should be set to -40°C~85°C TA.The lighting driver has a total of 1 outputs that are available for use.The LED driving board is powered by a voltage of Not Required.A maximum output voltage of P-Channel volts can be obtained with this LED driver.A lighting driver with Status Flag features is available.The FPF2174 family contains this object.There are 6 terminations in it.The 6 pins are used for the operation of the system.It is important to note that the LED driving board has 1 functions.High efficiency is possible at 3.3V supply voltage.In this case, it is mounted in the way of Surface Mount.This electrical component can be found in the IntelliMAX? series.As a result, the output current is set to 200mA.It is self-contained in an econtainer with a capacity of Peripheral Drivers.This LED driving board can accept voltages up to 5.5V volts as an input.There is a minimum input voltage of 1.8V volts for this LED driver.
FPF2174 Features
Supplied from 3.3V
FPF2174 Applications
There are a lot of ON Semiconductor FPF2174 Power Switches ICs applications.
- PC Cards
- Hot Swaps
- Hot Swap
- Portable GPS
- Handheld Devices
- HDD and SSD
- Wireless/Networking Cards
- Notebook PC
- Smartphone and PDA
- Gaming
