Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 4 days ago) |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
6-UFBGA, WLCSP |
Number of Pins |
6 |
Weight |
60mg |
Operating Temperature |
-40°C~85°C TA |
Packaging |
Tape & Reel (TR) |
Published |
2016 |
JESD-609 Code |
e1 |
Feature |
Auto Restart, Status Flag |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
6 |
ECCN Code |
EAR99 |
Resistance |
135mOhm |
Terminal Finish |
Tin/Silver/Copper (Sn/Ag/Cu) |
Power Rating |
1.2W |
Max Power Dissipation |
1.2W |
Terminal Position |
BOTTOM |
Terminal Form |
BALL |
Number of Functions |
1 |
Supply Voltage |
3.3V |
Terminal Pitch |
0.5mm |
Current Rating |
1.5A |
Base Part Number |
FPF2193 |
Number of Outputs |
1 |
Output Type |
P-Channel |
Max Output Current |
1.5A |
Operating Supply Voltage |
5.5V |
Number of Channels |
1 |
Voltage |
5.5V |
Interface |
On/Off |
Analog IC - Other Type |
POWER SUPPLY SUPPORT CIRCUIT |
Current |
1.5A |
Output Configuration |
High Side |
Power Dissipation |
1.2W |
Output Current |
600mA |
Voltage - Supply (Vcc/Vdd) |
Not Required |
Adjustable Threshold |
YES |
Input Type |
Non-Inverting |
Turn On Delay Time |
40 μs |
Switch Type |
General Purpose |
Min Input Voltage |
1.8V |
Max Input Voltage |
5.5V |
Nominal Input Voltage |
5.5V |
Turn-Off Delay Time |
125 μs |
Ratio - Input:Output |
1:1 |
Voltage - Load |
1.8V~5.5V |
Min Current Limit |
150mA |
Fault Protection |
Current Limiting (Adjustable), Over Temperature, Reverse Current, UVLO |
Rds On (Typ) |
55m Ω |
Height |
300μm |
Length |
1.5mm |
Width |
1mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
FPF2193 Overview
It is packaged in the form of a Tape & Reel (TR).This package is included in 6-UFBGA, WLCSP.The mounting type of the LED driver is Surface Mount.The switch type of this switch is General Purpose.Keeping the temperature at -40°C~85°C TA ensures reliable operation.The LED driver is equipped with 1 outputs.The LED driving board is powered by a voltage of Not Required.There is a maximum output voltage of P-Channel volts on this LED driver.A lighting driver with Auto Restart, Status Flag features is available.It is part of the FPF2193 family of LED drivers.A total of 6 terminations can be found in it.The operation is performed through the 6 pins.Currently, there are 1 functions associated with the lighting driver.The maximum output current is reduced to 1.5A to meet the operation criteria.As long as the supply voltage is 3.3V, high efficiency can be achieved.As a result, it is mounted in the manner of Surface Mount.In this LED driving board, there is 135mOhm resistance.When this is the case, the output current is set to 600mA.In this case, a digital IC is used, which is POWER SUPPLY SUPPORT CIRCUIT.A total of 1 channels are available for you to choose from.In order to maximize efficiency, the supply voltage should be set to 5.5V.This LED driver can handle voltages up to 5.5V volts.Input voltage must be at least 1.8V volts.
FPF2193 Features
Supplied from 3.3V
Resistance of 135mOhm
1 channels
FPF2193 Applications
There are a lot of ON Semiconductor FPF2193 Power Switches ICs applications.
- Storage Drives
- Solid State Drivers
- Notebook PC
- Hot-Swap Systems
- Telecom and Network Systems
- Smart Phones, Feature Phones
- HDD, SSD
- PDAs
- Hot Swap
- Portable Music Players