FPF2194
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | LIFETIME (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 6-UFBGA, WLCSP |
| Number of Pins | 6 |
| Weight | 60mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2016 |
| JESD-609 Code | e1 |
| Feature | Status Flag |
| Pbfree Code | yes |
| Part Status | Last Time Buy |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Resistance | 80mOhm |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Power Rating | 8.25W |
| Max Power Dissipation | 1.2W |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | FPF2194 |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Output Type | P-Channel |
| Max Output Current | 1.5A |
| Operating Supply Voltage | 5.5V |
| Number of Channels | 1 |
| Voltage | 5.5V |
| Interface | On/Off |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Current | 1.5A |
| Output Configuration | High Side |
| Power Dissipation | 1.2W |
| Output Current | 600mA |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Adjustable Threshold | YES |
| Input Type | Non-Inverting |
| Turn On Delay Time | 20 μs |
| Switch Type | General Purpose |
| Min Input Voltage | 1.8V |
| Max Input Voltage | 5.5V |
| Nominal Input Voltage | 5.5V |
| Turn-Off Delay Time | 15 μs |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 1.8V~5.5V |
| Min Current Limit | 150mA |
| Fault Protection | Current Limiting (Adjustable), Over Temperature, Reverse Current, UVLO |
| Rds On (Typ) | 55m Ω |
| Height | 620μm |
| Length | 980μm |
| Width | 1.48mm |
| RoHS Status | ROHS3 Compliant |
FPF2194 Overview
As you can see, it's packaged in the way of a Tape & Reel (TR).The 6-UFBGA, WLCSP package contains it.The LED driver is mounted as Surface Mount.The switch type is General Purpose.In order to guarantee reliable performance, the temperature should be set to -40°C~85°C TA.The lighting driver is equipped with 1 outputs that can be used.The LED driving board is powered by a voltage of Not Required.A maximum output voltage of P-Channel volts can be obtained with this LED driver.Status Flag features are available on the lighting driver.There is a FPF2194 family of things that it belongs to.It has a total of 6 terminations.It is necessary to use the 6 pins in order to operate the LED driver.There are 1 functions of the LED driver.To meet the operation criteria, the maximum output current drops to 1.5A.With a supply voltage of 3.3V, high efficiency is possible.It is positioned in the direction of Surface Mount.In this LED driving board, there is 80mOhm resistance.The output current is set to 600mA in this case.The gadget uses an analog IC, which is POWER SUPPLY SUPPORT CIRCUIT in this case.To choose from, there are 1 channels.Optimal efficiency requires a voltage of 5.5V.A maximum input voltage of 5.5V volts can be applied to it.There is a minimum input voltage of 1.8V volts for this LED driver.
FPF2194 Features
Supplied from 3.3V
Resistance of 80mOhm
1 channels
FPF2194 Applications
There are a lot of ON Semiconductor FPF2194 Power Switches ICs applications.
- USB Power Distribution
- Handheld Devices
- Notebook PC
- USB Protection
- Solid State Drivers
- Portable Music Players
- Hot Swaps
- PC Card Hot Swap
- Set-top-box
- Wireless Modem Data Cards
