FPF2195BUCX
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 6-UFBGA, WLCSP |
| Number of Pins | 6 |
| Weight | 60mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2016 |
| JESD-609 Code | e1 |
| Feature | Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Resistance | 135mOhm |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Power Rating | 8.25W |
| Max Power Dissipation | 1.2W |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | FPF2195 |
| Number of Outputs | 1 |
| Output Type | P-Channel |
| Max Output Current | 1.5A |
| Operating Supply Voltage | 5.5V |
| Number of Channels | 1 |
| Voltage | 5.5V |
| Interface | On/Off |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Current | 1.5A |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Adjustable Threshold | YES |
| Input Type | Non-Inverting |
| Turn On Delay Time | 40 μs |
| Switch Type | General Purpose |
| Min Input Voltage | 1.8V |
| Max Input Voltage | 5.5V |
| Turn-Off Delay Time | 125 μs |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 1.8V~5.5V |
| Min Current Limit | 150mA |
| Fault Protection | Current Limiting (Adjustable), Over Temperature, Reverse Current, UVLO |
| Rds On (Typ) | 55m Ω |
| Height | 620μm |
| Length | 980μm |
| Width | 1.48mm |
| RoHS Status | ROHS3 Compliant |
FPF2195BUCX Overview
The package is in the form of a Tape & Reel (TR).This file is included in package 6-UFBGA, WLCSP.Surface Mount is the mounting type of the LED driver.There is a switch type of General Purpose.Ensure reliable operation by setting the temperature to -40°C~85°C TA.It is possible to use 1 outputs in the lighting driver.Operation is based on Not Required supply voltage.Voltage output is P-Channel volts at maximum.In terms of features, the LED driving board has Status Flag.The FPF2195 family consists of this type.The termination count is 6.For operation, we use the 6 pins.As far as functions are concerned, the lighting driver has 1.This results in the maximum output current dropping to 1.5A to meet the operation criteria.High efficiency is possible at 3.3V supply voltage.In this case, it is mounted in the way of Surface Mount.Currently, the LED driving board has 135mOhm resistance.This gadget uses an analog IC, which is POWER SUPPLY SUPPORT CIRCUIT in this case.We offer 1 channels in total.For maximum efficiency, the supply voltage should be set to 5.5V.Input voltage is limited to 5.5V volts.The input voltage minimum is 1.8V volts.
FPF2195BUCX Features
Supplied from 3.3V
Resistance of 135mOhm
1 channels
FPF2195BUCX Applications
There are a lot of ON Semiconductor FPF2195BUCX Power Switches ICs applications.
- Hot Swap
- Wearable Devices
- PC Cards
- USB Protection
- USB Power Distribution
- Handheld Devices
- PDAs
- USB3.1 Power Delivery
- Low Voltage I/O System Power
- Solid-State Drives
