Parameters |
Weight |
30mg |
Operating Temperature |
-40°C~85°C TA |
Packaging |
Tape & Reel (TR) |
Published |
2016 |
Feature |
Auto Restart, Load Discharge, Status Flag |
Pbfree Code |
yes |
Part Status |
Obsolete |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
6 |
ECCN Code |
EAR99 |
Resistance |
230mOhm |
Terminal Finish |
Nickel/Gold/Palladium/Silver (Ni/Au/Pd/Ag) |
Subcategory |
Peripheral Drivers |
Max Power Dissipation |
1.2W |
Terminal Position |
DUAL |
Terminal Form |
NO LEAD |
Peak Reflow Temperature (Cel) |
NOT SPECIFIED |
Number of Functions |
1 |
Supply Voltage |
3.3V |
Current Rating |
500mA |
Time@Peak Reflow Temperature-Max (s) |
NOT SPECIFIED |
Base Part Number |
FPF2200 |
Number of Outputs |
1 |
Qualification Status |
Not Qualified |
Output Type |
P-Channel |
Operating Supply Voltage |
5.5V |
Interface |
On/Off |
Output Configuration |
High Side |
Power Dissipation |
1.2W |
Output Current |
504mA |
Voltage - Supply (Vcc/Vdd) |
Not Required |
Input Type |
Non-Inverting |
Turn On Delay Time |
70 μs |
Switch Type |
General Purpose |
Min Input Voltage |
1.8V |
Max Input Voltage |
5.5V |
Turn-Off Delay Time |
600 ns |
Ratio - Input:Output |
1:1 |
Voltage - Load |
1.8V~5.5V |
Driver Number of Bits |
1 |
Min Current Limit |
500mA |
Fault Protection |
Current Limiting (Fixed), Over Temperature, UVLO |
Output Peak Current Limit-Nom |
0.53A |
Rds On (Typ) |
140m Ω |
Built-in Protections |
OVER CURRENT; THERMAL; UNDER VOLTAGE |
Height Seated (Max) |
0.8mm |
Length |
2mm |
Width |
2mm |
RoHS Status |
RoHS Compliant |
Lead Free |
Lead Free |
Lifecycle Status |
LAST SHIPMENTS (Last Updated: 4 days ago) |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
6-VDFN Exposed Pad |
Number of Pins |
6 |
FPF2200 Overview
It is packaged in the manner of a Tape & Reel (TR).In the 6-VDFN Exposed Pad package, it is included.Mounting type Surface Mount is selected for the LED driving board.This switch is of type General Purpose.To ensure reliable operation, set the temperature to -40°C~85°C TA.The lighting driver has a total of 1 outputs that are available for use.To operate, it needs a supply voltage of Not Required.A maximum output voltage of P-Channel volts has been specified.A lighting driver with Auto Restart, Load Discharge, Status Flag features is available.It belongs to the FPF2200 family.A total of 6 terminations have been recorded.The 6 pins are used for the operation of the system.As far as functions are concerned, the lighting driver has 1.High efficiency is possible at 3.3V supply voltage.Surface Mount is mounted in the way of this lighting driver.The LED driver has 230mOhm resistance.The output current is set to 504mA in this case.A container with a capacity of Peripheral Drivers contains this self-contained lighting driver.A supply voltage of 5.5V is recommended for maximum efficiency.This LED driving board can accept voltages up to 5.5V volts as an input.The input voltage minimum is 1.8V volts.
FPF2200 Features
Supplied from 3.3V
Resistance of 230mOhm
FPF2200 Applications
There are a lot of ON Semiconductor FPF2200 Power Switches ICs applications.
- Hard Disk Drives
- Telecom and Network Systems
- USB3.1 Power Delivery
- HDD and SSD
- USB Power Distribution
- Various applications equipped with buttons
- PC Card Hot Swap
- Portable Music Players
- Set-Top Boxes
- Portable GPS Device