FPF2201
| Parameters | |
|---|---|
| Lifecycle Status | LAST SHIPMENTS (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 6-VDFN Exposed Pad |
| Number of Pins | 6 |
| Weight | 30mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2016 |
| Feature | Load Discharge, Status Flag |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Resistance | 230mOhm |
| Terminal Finish | Nickel/Gold/Palladium/Silver (Ni/Au/Pd/Ag) |
| Subcategory | Peripheral Drivers |
| Max Power Dissipation | 1.2W |
| Terminal Position | DUAL |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | FPF2201 |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Output Type | P-Channel |
| Operating Supply Voltage | 5.5V |
| Interface | On/Off |
| Output Configuration | High Side |
| Output Current | 504mA |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Turn On Delay Time | 70 μs |
| Switch Type | General Purpose |
| Min Input Voltage | 1.8V |
| Max Input Voltage | 5.5V |
| Turn-Off Delay Time | 600 ns |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 1.8V~5.5V |
| Driver Number of Bits | 1 |
| Min Current Limit | 500mA |
| Fault Protection | Current Limiting (Fixed), Over Temperature, UVLO |
| Output Peak Current Limit-Nom | 0.53A |
| Rds On (Typ) | 140m Ω |
| Built-in Protections | OVER CURRENT; THERMAL; UNDER VOLTAGE |
| Height Seated (Max) | 0.8mm |
| Length | 2mm |
| Width | 2mm |
| RoHS Status | RoHS Compliant |
FPF2201 Overview
The LED driver's packaged as a Tape & Reel (TR).It's included in the 6-VDFN Exposed Pad package.The lighting driver is mounted in the Surface Mount position.There is a switch type of General Purpose.To ensure reliable operation, the temperature should be set to -40°C~85°C TA.It is possible to use 1 outputs in the lighting driver.With a supply voltage of Not Required, the LED driving board operates.A maximum output voltage of P-Channel volts can be achieved by this LED driver.The lighting driver has Load Discharge, Status Flag features.There is a FPF2201 family of things that it belongs to.As a result, there are 6 terminations.For operation, 6 pins are used.Currently, there are 1 functions associated with the lighting driver.Supply voltages of 3.3V allow for high efficiency.The LED driving board is mounted in the way of Surface Mount.Lighting drivers with 230mOhm resistance are used.This case has the output current set to 504mA.The LED driver is self-contained in an econtainer with Peripheral Drivers capacity.It is recommended to set the supply voltage to 5.5V for optimum efficiency.There is a maximum input voltage of 5.5V volts.It has a 1.8V volt minimum input voltage.
FPF2201 Features
Supplied from 3.3V
Resistance of 230mOhm
FPF2201 Applications
There are a lot of ON Semiconductor FPF2201 Power Switches ICs applications.
- Set-Top Boxes
- USB Power Distribution
- Portable/Handheld Devices
- Smartphone and PDA
- Portable GPS Device
- HDD and SSD
- Notebook PC
- Hard Disk Drives
- USB Power Distribution
- Low Voltage I/O System Power
