FPF2213
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 6-VDFN Exposed Pad |
| Number of Pins | 6 |
| Weight | 30mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2016 |
| Feature | Auto Restart, Load Discharge, Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Resistance | 350mOhm |
| Terminal Finish | Nickel/Gold/Palladium/Silver (Ni/Au/Pd/Ag) |
| Subcategory | Peripheral Drivers |
| Power Rating | 1.5W |
| Max Power Dissipation | 1.2W |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Base Part Number | FPF2213 |
| Number of Outputs | 1 |
| Output Type | P-Channel |
| Operating Supply Voltage | 5.5V |
| Voltage | 5.5V |
| Interface | On/Off |
| Current | 250mA |
| Output Configuration | High Side |
| Power Dissipation | 1.2W |
| Output Current | 250mA |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Turn On Delay Time | 70 μs |
| Switch Type | General Purpose |
| Min Input Voltage | 1.8V |
| Max Input Voltage | 5.5V |
| Turn-Off Delay Time | 600 ns |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 1.8V~5.5V |
| Driver Number of Bits | 1 |
| Min Current Limit | 100mA |
| Fault Protection | Current Limiting (Adjustable), Over Temperature, UVLO |
| Output Peak Current Limit-Nom | 0.263A |
| Rds On (Typ) | 250m Ω |
| Built-in Protections | OVER CURRENT; UNDER VOLTAGE |
| Height | 725μm |
| Length | 2mm |
| Width | 2mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
FPF2213 Overview
Tape & Reel (TR) is the way it's packaged.The 6-VDFN Exposed Pad package includes it.This lighting drivere has a mounting type of Surface Mount.There is a switch type of General Purpose.In order to guarantee reliable performance, the temperature should be set to -40°C~85°C TA.The LED driver is equipped with 1 outputs.To operate, it needs a supply voltage of Not Required.It produces a maximum output voltage of P-Channel volts at its maximum output.Currently, the LED driving board is equipped with Auto Restart, Load Discharge, Status Flag features.The FPF2213 family contains this object.It contains 6 terminations.6 pins are used for operation.The LED driver has 1 functions.The supply voltage of 3.3V is conducive to high efficiency.As a result, it is mounted in the manner of Surface Mount.There is 350mOhm resistance on the LED driver.This results in a 250mA output current.A self-contained econtainer holding Peripheral Drivers capacity contains this lighting driver.It is recommended that the supply voltage be set at 5.5V in order to achieve maximum efficiency.The maximum input voltage of the LED driver is 5.5V volts.Input voltage must be at least 1.8V volts.
FPF2213 Features
Supplied from 3.3V
Resistance of 350mOhm
FPF2213 Applications
There are a lot of ON Semiconductor FPF2213 Power Switches ICs applications.
- Hot-Swap Systems
- Set-Top Boxes
- Telecom and Network Systems
- Portable Devices
- PDAs
- Notebook and Tablet Computers
- USB Protection
- USB Power Distribution
- Smartphone and PDA
- Wearable Devices
