FPF2214
| Parameters | |
|---|---|
| Lifecycle Status | LAST SHIPMENTS (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 6-VDFN Exposed Pad |
| Number of Pins | 6 |
| Weight | 30mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2016 |
| Feature | Load Discharge, Status Flag |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Resistance | 350mOhm |
| Terminal Finish | Nickel/Gold/Palladium/Silver (Ni/Au/Pd/Ag) |
| Subcategory | Peripheral Drivers |
| Max Power Dissipation | 1.2W |
| Terminal Position | DUAL |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | FPF2214 |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Output Type | P-Channel |
| Operating Supply Voltage | 5.5V |
| Interface | On/Off |
| Output Configuration | High Side |
| Output Current | 250mA |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Turn On Delay Time | 70 μs |
| Switch Type | General Purpose |
| Min Input Voltage | 1.8V |
| Max Input Voltage | 5.5V |
| Turn-Off Delay Time | 600 ns |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 1.8V~5.5V |
| Driver Number of Bits | 1 |
| Min Current Limit | 100mA |
| Fault Protection | Current Limiting (Adjustable), Over Temperature, UVLO |
| Output Peak Current Limit-Nom | 0.263A |
| Rds On (Typ) | 250m Ω |
| Built-in Protections | OVER CURRENT; UNDER VOLTAGE |
| Height Seated (Max) | 0.8mm |
| Length | 2mm |
| Width | 2mm |
| RoHS Status | RoHS Compliant |
FPF2214 Overview
Tape & Reel (TR) is how it's packaged.There is a package for it in the 6-VDFN Exposed Pad package.This lighting drivere has a mounting type of Surface Mount.There is a switch type of General Purpose.It is best to set the temperature to -40°C~85°C TA to ensure reliable operation.The lighting driver has a total of 1 outputs that are available for use.Operation is based on Not Required supply voltage.Voltage output is P-Channel volts at maximum.Currently, the LED driving board is equipped with Load Discharge, Status Flag features.It is part of the FPF2214 family of LED drivers.As a result, there are 6 terminations.For operation, 6 pins are used.Currently, there are 1 functions associated with the lighting driver.Using a voltage of 3.3V allows for high efficiency.The LED driving board is mounted in the way of Surface Mount.350mOhm resistance is present in the lighting driver.It is set to 250mA in this case.Self-contained LED driver with Peripheral Drivers capacity in an econtainer.In order to optimize the efficiency of the supply voltage, it should be set to 5.5V.The maximum input voltage of the LED driver is 5.5V volts.There is a minimum input voltage of 1.8V volts for this LED driver.
FPF2214 Features
Supplied from 3.3V
Resistance of 350mOhm
FPF2214 Applications
There are a lot of ON Semiconductor FPF2214 Power Switches ICs applications.
- Various applications equipped with buttons
- Hard Disk Drives
- Low Voltage I/O System Power
- Handheld Devices
- USB Ports/Hubs
- Wireless Modem Data Cards
- Storage Drives
- Notebook PC
- Set-top-box
- Wearable Devices
