Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 4 days ago) |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
6-VDFN Exposed Pad |
Number of Pins |
6 |
Weight |
30mg |
Operating Temperature |
-40°C~85°C TA |
Packaging |
Tape & Reel (TR) |
Published |
2016 |
Feature |
Load Discharge, Status Flag |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
6 |
ECCN Code |
EAR99 |
Resistance |
350mOhm |
Terminal Finish |
Nickel/Gold/Palladium/Silver (Ni/Au/Pd/Ag) |
Subcategory |
Peripheral Drivers |
Power Rating |
1.5W |
Max Power Dissipation |
1.2W |
Terminal Position |
DUAL |
Terminal Form |
NO LEAD |
Peak Reflow Temperature (Cel) |
NOT SPECIFIED |
Number of Functions |
1 |
Supply Voltage |
3.3V |
Time@Peak Reflow Temperature-Max (s) |
NOT SPECIFIED |
Base Part Number |
FPF2215 |
Number of Outputs |
1 |
Qualification Status |
Not Qualified |
Output Type |
P-Channel |
Operating Supply Voltage |
5.5V |
Voltage |
5.5V |
Interface |
On/Off |
Current |
250mA |
Output Configuration |
High Side |
Power Dissipation |
1.2W |
Output Current |
250mA |
Voltage - Supply (Vcc/Vdd) |
Not Required |
Input Type |
Non-Inverting |
Turn On Delay Time |
70 μs |
Switch Type |
General Purpose |
Min Input Voltage |
1.8V |
Max Input Voltage |
5.5V |
Turn-Off Delay Time |
600 ns |
Ratio - Input:Output |
1:1 |
Voltage - Load |
1.8V~5.5V |
Driver Number of Bits |
1 |
Min Current Limit |
100mA |
Fault Protection |
Current Limiting (Adjustable), Over Temperature, UVLO |
Output Peak Current Limit-Nom |
0.263A |
Rds On (Typ) |
250m Ω |
Built-in Protections |
OVER CURRENT; UNDER VOLTAGE |
Height |
725μm |
Length |
2mm |
Width |
2mm |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
FPF2215 Overview
It is packaged in the form of a Tape & Reel (TR).It is included with the 6-VDFN Exposed Pad package as well.The mounting type of the LED driver is Surface Mount.The switch type is General Purpose.In order to guarantee reliable performance, the temperature should be set to -40°C~85°C TA.The LED driver has 1 outputs.Operation is based on Not Required supply voltage.A maximum output voltage of P-Channel volts can be achieved by this LED driver.Features of the lighting driver are Load Discharge, Status Flag.It belongs to the family FPF2215.The termination count is 6.The operation is performed through the 6 pins.There are 1 functions of the LED driver.Supply voltages of 3.3V allow for high efficiency.Surface Mount is mounted in the way of this lighting driver.It has a resistance of 350mOhm.This case results in a 250mA output current.This LED driver is self-contained in an econtainer with a capacity of Peripheral Drivers.A supply voltage of 5.5V is recommended for maximum efficiency.Input voltage is limited to 5.5V volts.Input voltage must be at least 1.8V volts.
FPF2215 Features
Supplied from 3.3V
Resistance of 350mOhm
FPF2215 Applications
There are a lot of ON Semiconductor FPF2215 Power Switches ICs applications.
- HDD and SSD
- Portable Video Game Players
- Set-top-box
- USB Ports/Hubs
- Portable GPS
- Wireless Headsets
- Notebook and Tablet Computers
- PC Card Hot Swap
- Portable Music Players
- Hot Swaps