Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
LIFETIME (Last Updated: 4 days ago) |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
6-VDFN Exposed Pad |
Number of Pins |
6 |
Weight |
30mg |
Operating Temperature |
-40°C~85°C TA |
Packaging |
Tape & Reel (TR) |
Published |
2009 |
Feature |
Load Discharge, Status Flag |
Pbfree Code |
yes |
Part Status |
Last Time Buy |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
6 |
ECCN Code |
EAR99 |
Resistance |
230mOhm |
Terminal Finish |
Nickel/Gold/Palladium/Silver (Ni/Au/Pd/Ag) |
Subcategory |
Peripheral Drivers |
Power Rating |
1.2W |
Max Power Dissipation |
1.2W |
Terminal Position |
DUAL |
Terminal Form |
NO LEAD |
Peak Reflow Temperature (Cel) |
NOT SPECIFIED |
Number of Functions |
1 |
Supply Voltage |
3.3V |
Time@Peak Reflow Temperature-Max (s) |
NOT SPECIFIED |
Base Part Number |
FPF2224 |
Number of Outputs |
1 |
Qualification Status |
Not Qualified |
Output Type |
P-Channel |
Operating Supply Voltage |
5.5V |
Voltage |
5.5V |
Interface |
On/Off |
Current - Output (Max) |
625mA |
Current |
693mA |
Output Configuration |
High Side |
Power Dissipation |
1.2W |
Output Current |
627mA |
Voltage - Supply (Vcc/Vdd) |
Not Required |
Input Type |
Non-Inverting |
Turn On Delay Time |
70 μs |
Switch Type |
General Purpose |
Min Input Voltage |
1.8V |
Max Input Voltage |
5.5V |
Turn-Off Delay Time |
600 ns |
Ratio - Input:Output |
1:1 |
Voltage - Load |
1.8V~5.5V |
Driver Number of Bits |
1 |
Min Current Limit |
250mA |
Fault Protection |
Current Limiting (Adjustable), Over Temperature, UVLO |
Output Peak Current Limit-Nom |
0.66A |
Rds On (Typ) |
140m Ω |
Built-in Protections |
OVER CURRENT; UNDER VOLTAGE |
Height |
750μm |
Length |
2mm |
Width |
2mm |
RoHS Status |
ROHS3 Compliant |
FPF2224 Overview
A Tape & Reel (TR) is used to package it.This package is included in 6-VDFN Exposed Pad.The lighting driver is mounted in the Surface Mount position.General Purpose is the type of switch owned by it.It is recommended that the temperature be set to -40°C~85°C TA for reliable operation.In this LED driver, there are no outputs available.The LED driving board operates at Not Required volts.It produces a maximum output voltage of P-Channel volts at its maximum output.It has a total of Load Discharge, Status Flag features.As you can see, it comes from the FPF2224 family.It has a total of 6 terminations.In order to operate, the 6 pins are used.The LED driver has 1 functions.The maximum output of the LED driving board is 625mAV.The supply voltage of 3.3V is conducive to high efficiency.The lighting driver is mounted in the direction of Surface Mount.Currently, the LED driving board has a resistance of 230mOhm ohms.When this is the case, the output current is set to 627mA.A self-contained LED driver with a capacity of Peripheral Drivers is contained in an econtainer.In order to achieve the best efficiency, the supply voltage should be set to 5.5V.There is a maximum input voltage of 5.5V volts.As a minimum input voltage, it requires 1.8V volts.
FPF2224 Features
Supplied from 3.3V
Resistance of 230mOhm
FPF2224 Applications
There are a lot of ON Semiconductor FPF2224 Power Switches ICs applications.
- Smart Phones, Feature Phones
- Mobile Communication Devices
- Set-top-box
- USB3.1 Power Delivery
- Smartphone and PDA
- Wearable Devices
- Low Voltage I/O System Power
- Portable Devices
- Portable GPS Device
- Gaming