FPF2300MPX
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | LAST SHIPMENTS (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-WDFN Exposed Pad |
| Number of Pins | 8 |
| Weight | 129mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2014 |
| Series | IntelliMAX™ |
| JESD-609 Code | e4 |
| Feature | Auto Restart, Slew Rate Controlled, Status Flag |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 140mOhm |
| Terminal Finish | Nickel/Palladium/Gold/Silver (Ni/Pd/Au/Ag) |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Current Rating | 1.3A |
| Base Part Number | FPF2300 |
| Number of Outputs | 2 |
| Output Type | P-Channel |
| Max Output Current | 1.5A |
| Operating Supply Voltage | 5.5V |
| Number of Channels | 2 |
| Interface | On/Off |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Output Configuration | High Side |
| Output Current | 1.3A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 1.3A |
| Adjustable Threshold | NO |
| Input Type | Non-Inverting |
| Turn On Delay Time | 113.5 μs |
| Switch Type | General Purpose |
| Min Input Voltage | 1.8V |
| Number of Inputs | 1 |
| Max Input Voltage | 5.5V |
| Turn-Off Delay Time | 6 μs |
| Ratio - Input:Output | 1:2 |
| Voltage - Load | 1.8V~5.5V |
| Min Current Limit | 1.1A |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Reverse Current, UVLO |
| Rds On (Typ) | 75m Ω |
| Height | 750μm |
| Length | 3mm |
| Width | 3mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
FPF2300MPX Overview
It is packaged in the manner of a Tape & Reel (TR).In the 8-WDFN Exposed Pad package, it is included.Mounting type Surface Mount is selected for the LED driving board.It owns the General Purpose switch type.It is recommended to set the temperature to -40°C~85°C TA in order to ensure reliable operation.The lighting driver is equipped with 2 outputs that can be used.The LED driving board operates with a supply voltage of Not Required.Voltage output is P-Channel volts at maximum.It is equipped with Auto Restart, Slew Rate Controlled, Status Flag features.This object belongs to the FPF2300 family.In total, there are 8 terminations.In order to operate, the 8 pins are used.The LED driver has 1 functions.To comply with the operation criteria, the maximum output current is reduced to 1.5A.Supply voltages of 3.3V allow for high efficiency.The LED driving board is mounted in the way of Surface Mount.In this case, there is 140mOhm resistance in the LED driving board.This electrical component is included in the IntelliMAX? series.The output current is set to 1.3A in this case.There is an analog input IC in this gadget, which is POWER SUPPLY SUPPORT CIRCUIT.There are a total of 2 available channels.The supply voltage should be set at 5.5V for best efficiency.The maximum input voltage is 5.5V volts.There is a minimum input voltage of 1.8V volts for this LED driver.It requires 1.3A current to operate.A total of 1 inputs are available.
FPF2300MPX Features
Supplied from 3.3V
Resistance of 140mOhm
2 channels
FPF2300MPX Applications
There are a lot of ON Semiconductor FPF2300MPX Power Switches ICs applications.
- Solid-State Drives
- Wireless Modem Data Cards
- Portable/Handheld Devices
- Hot-Swap Systems
- Hot Swaps
- Hot Swap
- USB Ports/Hubs
- Portable Video Game Players
- USB Power Distribution
- Hard Disk Drives
