FPF2300MX
| Parameters | |
|---|---|
| Operating Temperature | -40°C~85°C TA |
| Packaging | Cut Tape (CT) |
| Published | 2009 |
| Series | IntelliMAX™ |
| Feature | Auto Restart, Slew Rate Controlled, Status Flag |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 140mOhm |
| Power Rating | 16.5W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Current Rating | 1.3A |
| Base Part Number | FPF2300 |
| Number of Outputs | 2 |
| Output Type | P-Channel |
| Max Output Current | 1.5A |
| Operating Supply Voltage | 5.5V |
| Number of Channels | 2 |
| Voltage | 5.5V |
| Interface | On/Off |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Current | 1.1A |
| Output Configuration | High Side |
| Output Current | 1.5A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Adjustable Threshold | NO |
| Input Type | Non-Inverting |
| Turn On Delay Time | 113.5 μs |
| Switch Type | General Purpose |
| Min Input Voltage | 1.8V |
| Number of Inputs | 1 |
| Max Input Voltage | 5.5V |
| Turn-Off Delay Time | 6 μs |
| Ratio - Input:Output | 1:2 |
| Voltage - Load | 1.8V~5.5V |
| Min Current Limit | 1.1A |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Reverse Current, UVLO |
| Rds On (Typ) | 75m Ω |
| Height | 1.5mm |
| Length | 5mm |
| Width | 4mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
| Lifecycle Status | LAST SHIPMENTS (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Weight | 230.4mg |
FPF2300MX Overview
It is packaged in the form of a Cut Tape (CT).It's included in the 8-SOIC (0.154, 3.90mm Width) package.This LED driving board is mounted using the mounting type Surface Mount.The switch type is General Purpose.Ensure reliable operation by setting the temperature to -40°C~85°C TA.By default, it is set to output 2.The LED driving board is powered by a voltage of Not Required.It produces a maximum output voltage of P-Channel volts at its maximum output.As far as features are concerned, the LED driving board has Auto Restart, Slew Rate Controlled, Status Flag.As you can see, it comes from the FPF2300 family.It contains 8 terminations.In order to operate, 8 pins are used.It contains 1 functions.This operation requires the maximum output current to be decreased to 1.5A.With a supply voltage of 3.3V, high efficiency is possible.It is mounted in the way of Surface Mount.Currently, the LED driving board has a resistance of 140mOhm ohms.This electrical component is included in the IntelliMAX? series.This case results in a 1.5A output current.In this case, the analog IC in this gadget is POWER SUPPLY SUPPORT CIRCUIT.The total number of channels is 2.It is recommended that the supply voltage be set at 5.5V in order to achieve maximum efficiency.The maximum input voltage of the LED driver is 5.5V volts.The input voltage minimum is 1.8V volts.We have available 1 inputs.
FPF2300MX Features
Supplied from 3.3V
Resistance of 140mOhm
2 channels
FPF2300MX Applications
There are a lot of ON Semiconductor FPF2300MX Power Switches ICs applications.
- Hot Swap
- Gaming
- Portable/Handheld Devices
- Wearable Devices
- Portable GPS Device
- USB3.1 Power Delivery
- Telecom and Network Systems
- Solid-State Drives
- Wireless Headsets
- Wireless Modem Data Cards
