FPF2302MPX
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | LAST SHIPMENTS (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-WDFN Exposed Pad |
| Number of Pins | 8 |
| Weight | 129mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2014 |
| Series | IntelliMAX™ |
| JESD-609 Code | e4 |
| Feature | Slew Rate Controlled, Status Flag |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 140mOhm |
| Terminal Finish | Nickel/Palladium/Gold/Silver (Ni/Pd/Au/Ag) |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Current Rating | 1.3A |
| Base Part Number | FPF2302 |
| Number of Outputs | 2 |
| Output Type | P-Channel |
| Max Output Current | 1.1A |
| Operating Supply Voltage | 5.5V |
| Number of Channels | 2 |
| Interface | On/Off |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Output Configuration | High Side |
| Output Current | 1.3A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 1.3A |
| Adjustable Threshold | NO |
| Input Type | Non-Inverting |
| Turn On Delay Time | 113.5 μs |
| Switch Type | General Purpose |
| Min Input Voltage | 1.8V |
| Number of Inputs | 1 |
| Max Input Voltage | 5.5V |
| Turn-Off Delay Time | 6 μs |
| Ratio - Input:Output | 1:2 |
| Voltage - Load | 1.8V~5.5V |
| Min Current Limit | 1.1A |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Reverse Current, UVLO |
| Rds On (Typ) | 75m Ω |
| Height | 750μm |
| Length | 3mm |
| Width | 3mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
FPF2302MPX Overview
It's?packaged?in?the way?of?a?Tape & Reel (TR).The 8-WDFN Exposed Pad package includes it.This lighting drivere has a mounting type of Surface Mount.A General Purpose switch type is owned by it.To ensure reliable operation, set the temperature to -40°C~85°C TA.By default, it is set to output 2.The LED driving board is powered by a voltage of Not Required.It produces a maximum output voltage of P-Channel volts at its maximum output.There are Slew Rate Controlled, Status Flag features available on the LED driving board.This object belongs to the FPF2302 family.The termination count is 8.In order to operate, 8 pins are used.It contains 1 functions.In order to meet the operation criteria, the maximum output current drops to 1.1A.It is possible to obtain high efficiency with a supply voltage of 3.3V.It is mounted in the way of Surface Mount.In this case, there is 140mOhm resistance in the LED driving board.It is part of the IntelliMAX? series.It is set to 1.3A in this case.In this case, a digital IC is used, which is POWER SUPPLY SUPPORT CIRCUIT.You can select from 2 channels.When using this LED driving board, it is recommended that the supply voltage is set to 5.5V.The maximum input voltage is 5.5V volts.There is a minimum input voltage of 1.8V volts for this LED driver.For its operation, a current of 1.3A is required.The lighting driver is equipped with 1 inputs.
FPF2302MPX Features
Supplied from 3.3V
Resistance of 140mOhm
2 channels
FPF2302MPX Applications
There are a lot of ON Semiconductor FPF2302MPX Power Switches ICs applications.
- Notebook and Tablet Computers
- Portable Video Game Players
- Notebook PC
- Hot Swap
- Solid State Drivers
- Telecom and Network Systems
- Smartphone and PDA
- USB Power Distribution
- Storage (HDDs, SSDs)
- Wireless Modem Data Cards
