FPF2302MX
| Parameters | |
|---|---|
| Current Rating | 1.3A |
| Base Part Number | FPF2302 |
| Number of Outputs | 2 |
| Output Type | P-Channel |
| Max Output Current | 1.5A |
| Operating Supply Voltage | 5.5V |
| Number of Channels | 2 |
| Interface | On/Off |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Output Configuration | High Side |
| Output Current | 1.5A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Adjustable Threshold | NO |
| Input Type | Non-Inverting |
| Turn On Delay Time | 113.5 μs |
| Switch Type | General Purpose |
| Min Input Voltage | 1.8V |
| Number of Inputs | 1 |
| Max Input Voltage | 5.5V |
| Turn-Off Delay Time | 6 μs |
| Ratio - Input:Output | 1:2 |
| Voltage - Load | 1.8V~5.5V |
| Min Current Limit | 1.1A |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Reverse Current, UVLO |
| Rds On (Typ) | 75m Ω |
| Length | 4.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
| Lifecycle Status | LAST SHIPMENTS (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Weight | 230.4mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2009 |
| Series | IntelliMAX™ |
| JESD-609 Code | e4 |
| Feature | Slew Rate Controlled, Status Flag |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 140mOhm |
| Terminal Finish | Nickel/Palladium/Gold/Silver (Ni/Pd/Au/Ag) |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
FPF2302MX Overview
As you can see, it's packaged in the way of a Tube.The 8-SOIC (0.154, 3.90mm Width) package includes it.In this case, the LED driving board is mounted as Surface Mount.It owns General Purpose switch type.Ensure reliable operation by setting the temperature to -40°C~85°C TA.There is a default setting of 2 for output.Operation is based on Not Required supply voltage.A maximum output voltage of P-Channel volts can be achieved by this LED driver.Features of the lighting driver are Slew Rate Controlled, Status Flag.There is a FPF2302 family of things that it belongs to.It contains 8 terminations.In order to operate, 8 pins are used.As far as functions are concerned, the lighting driver has 1.In order to meet the operation criteria, the maximum output current drops to 1.5A.High efficiency is possible at 3.3V supply voltage.This lighting driver is mounted in the way of Surface Mount.140mOhm is the resistance of the lighting driver.It is included in the IntelliMAX? series.This case has the output current set to 1.5A.This gadget uses an analog IC, which is POWER SUPPLY SUPPORT CIRCUIT in this case.You can select from 2 channels.In order to maximize efficiency, the supply voltage should be set to 5.5V.The maximum input voltage of the LED driver is 5.5V volts.The minimum input voltage is 1.8V volts.1 inputs are provided.
FPF2302MX Features
Supplied from 3.3V
Resistance of 140mOhm
2 channels
FPF2302MX Applications
There are a lot of ON Semiconductor FPF2302MX Power Switches ICs applications.
- USB3.1 Power Delivery
- Mobile Communication Devices
- Portable Video Game Players
- PDAs
- Wearable Devices
- Portable Devices
- Hot Swap
- Telecom and Network Systems
- PC Card Hot Swap
- HDD, SSD
