FPF2303MPX
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | LAST SHIPMENTS (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-WDFN Exposed Pad |
| Number of Pins | 8 |
| Weight | 129mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2014 |
| Series | IntelliMAX™ |
| JESD-609 Code | e4 |
| Feature | Slew Rate Controlled, Status Flag |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 140mOhm |
| Terminal Finish | Nickel/Palladium/Gold/Silver (Ni/Pd/Au/Ag) |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Current Rating | 1.3A |
| Base Part Number | FPF2303 |
| Number of Outputs | 2 |
| Output Type | P-Channel |
| Max Output Current | 1.5A |
| Operating Supply Voltage | 5.5V |
| Number of Channels | 2 |
| Interface | On/Off |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Output Configuration | High Side |
| Output Current | 1.5A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 1.3A |
| Adjustable Threshold | NO |
| Input Type | Non-Inverting |
| Turn On Delay Time | 113.5 μs |
| Switch Type | General Purpose |
| Min Input Voltage | 1.8V |
| Number of Inputs | 1 |
| Max Input Voltage | 5.5V |
| Turn-Off Delay Time | 6 μs |
| Ratio - Input:Output | 1:2 |
| Voltage - Load | 1.8V~5.5V |
| Min Current Limit | 1.1A |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Reverse Current, UVLO |
| Rds On (Typ) | 75m Ω |
| Height | 750μm |
| Length | 3mm |
| Width | 3mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
FPF2303MPX Overview
Tape & Reel (TR) is how it's packaged.It's included in the 8-WDFN Exposed Pad package.Mounting type Surface Mount is selected for the LED driving board.General Purpose is the switch type that it owns.To ensure reliable performance, the temperature should be set to -40°C~85°C TA.There is a default setting of 2 for output.It uses a supply voltage of Not Required to operate.The maximum output voltage of this LED driver is P-Channel volts.Slew Rate Controlled, Status Flag features are available on the lighting driver.There is a FPF2303 family of things that it belongs to.In total, there are 8 terminations.8 pins are used for operation.As far as functions are concerned, the lighting driver has 1.The maximum output current drops to 1.5A in order to meet the operation criteria.With a supply voltage of 3.3V, high efficiency is possible.As a result, it is mounted in the manner of Surface Mount.140mOhm resistance is present in the lighting driver.The IntelliMAX? series includes this electrical component.In this case, the output current will be set to 1.5A.In this case, a digital IC is used, which is POWER SUPPLY SUPPORT CIRCUIT.There are a total of 2 channels available.In order to achieve the best efficiency, the supply voltage should be set to 5.5V.Input voltage is limited to 5.5V volts.The minimum input voltage is 1.8V volts.It has a maximum current requirement of 1.3A.The lighting driver is equipped with 1 inputs.
FPF2303MPX Features
Supplied from 3.3V
Resistance of 140mOhm
2 channels
FPF2303MPX Applications
There are a lot of ON Semiconductor FPF2303MPX Power Switches ICs applications.
- Set-Top Boxes
- Telecom and Network Systems
- Hard Disk Drives
- Portable/Handheld Devices
- Set-top-box
- Low Voltage I/O System Power
- Various applications equipped with buttons
- Portable Music Players
- Storage Drives
- Smartphone and PDA
