Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
LIFETIME (Last Updated: 1 week ago) |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
8-SOIC (0.154, 3.90mm Width) |
Number of Pins |
8 |
Weight |
230.4mg |
Operating Temperature |
-40°C~85°C TA |
Packaging |
Tape & Reel (TR) |
Published |
2014 |
Series |
IntelliMAX™ |
JESD-609 Code |
e4 |
Feature |
Slew Rate Controlled, Status Flag |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
8 |
ECCN Code |
EAR99 |
Resistance |
140mOhm |
Terminal Finish |
Nickel/Palladium/Gold/Silver (Ni/Pd/Au/Ag) |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Number of Functions |
1 |
Supply Voltage |
3.3V |
Current Rating |
1.3A |
Base Part Number |
FPF2303 |
Number of Outputs |
2 |
Output Type |
P-Channel |
Max Output Current |
1.1A |
Operating Supply Voltage |
5.5V |
Number of Channels |
2 |
Interface |
On/Off |
Analog IC - Other Type |
POWER SUPPLY SUPPORT CIRCUIT |
Output Configuration |
High Side |
Output Current |
1.5A |
Voltage - Supply (Vcc/Vdd) |
Not Required |
Adjustable Threshold |
NO |
Input Type |
Non-Inverting |
Turn On Delay Time |
113.5 μs |
Switch Type |
General Purpose |
Min Input Voltage |
1.8V |
Number of Inputs |
1 |
Max Input Voltage |
5.5V |
Turn-Off Delay Time |
6 μs |
Ratio - Input:Output |
1:2 |
Voltage - Load |
1.8V~5.5V |
Min Current Limit |
1.1A |
Fault Protection |
Current Limiting (Fixed), Over Temperature, Reverse Current, UVLO |
Rds On (Typ) |
75m Ω |
Length |
4.9mm |
Width |
3.9mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
FPF2303MX Overview
As a result, it is packaged in the form of a Tape & Reel (TR).It is included with the 8-SOIC (0.154, 3.90mm Width) package as well.This lighting drivere has a mounting type of Surface Mount.The switch type of this switch is General Purpose.It is recommended that the temperature be set to -40°C~85°C TA for reliable performance.In this LED driver, there are no outputs available.Operation is based on Not Required supply voltage.A maximum output voltage of P-Channel volts has been specified.A lighting driver with Slew Rate Controlled, Status Flag features is available.There is a FPF2303 family of things that it belongs to.It consists of 8 terminations in total.The operation is carried out using the 8 pins.The LED driving board has a total of 1 functions.To comply with the operation criteria, the maximum output current is reduced to 1.1A.High efficiency is possible at 3.3V supply voltage.The lighting driver is mounted in the direction of Surface Mount.It has 140mOhm resistance.It belongs to the IntelliMAX? series.This results in a 1.5A output current.In this LED driving board, the analog IC POWER SUPPLY SUPPORT CIRCUIT is employed.There are a total of 2 available channels.It is recommended that the supply voltage be set at 5.5V in order to achieve maximum efficiency.There is a maximum input voltage of 5.5V volts.As a minimum input voltage, it requires 1.8V volts.It is equipped with 1 input.
FPF2303MX Features
Supplied from 3.3V
Resistance of 140mOhm
2 channels
FPF2303MX Applications
There are a lot of ON Semiconductor FPF2303MX Power Switches ICs applications.
- HDD, SSD
- Wearable Devices
- Gaming
- Set-top-box
- Storage Drives
- Solid State Drivers
- Hot Swaps
- Handheld Devices
- USB3.1 Power Delivery
- Mobile Communication Devices