FPF2312MPX
| Parameters | |
|---|---|
| Terminal Pitch | 0.65mm |
| Current Rating | 600mA |
| Base Part Number | FPF2312 |
| Number of Outputs | 2 |
| Output Type | P-Channel |
| Operating Supply Voltage | 5.5V |
| Number of Channels | 2 |
| Interface | On/Off |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Output Configuration | High Side |
| Output Current | 600mA |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 600mA |
| Adjustable Threshold | NO |
| Input Type | Non-Inverting |
| Turn On Delay Time | 111 μs |
| Switch Type | General Purpose |
| Min Input Voltage | 1.8V |
| Max Input Voltage | 5.5V |
| Turn-Off Delay Time | 5 μs |
| Ratio - Input:Output | 1:2 |
| Voltage - Load | 1.8V~5.5V |
| Min Current Limit | 400mA |
| Fault Protection | Current Limiting (Adjustable), Over Temperature, UVLO |
| Rds On (Typ) | 75m Ω |
| Height | 750μm |
| Length | 3mm |
| Width | 3mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
| Lifecycle Status | LAST SHIPMENTS (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-WDFN Exposed Pad |
| Number of Pins | 8 |
| Weight | 129mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2014 |
| Series | IntelliMAX™ |
| JESD-609 Code | e4 |
| Feature | Load Discharge, Slew Rate Controlled |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 140mOhm |
| Terminal Finish | Nickel/Palladium/Gold/Silver (Ni/Pd/Au/Ag) |
| Max Power Dissipation | 2.2W |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
FPF2312MPX Overview
As a result, it is packaged in the form of a Tape & Reel (TR).The 8-WDFN Exposed Pad package includes it.In this case, the LED driving board is mounted as Surface Mount.There is a switch type of General Purpose.It is recommended to set the temperature to -40°C~85°C TA in order to ensure reliable operation.There are 2 outputs available on this lighting driver.The LED driving board is powered by a voltage of Not Required.The maximum output voltage is P-Channel volts.Currently, the LED driving board is equipped with Load Discharge, Slew Rate Controlled features.The FPF2312 family consists of this type.It has a total of 8 terminations.In order to operate, 8 pins are used.It is important to note that the LED driving board has 1 functions.With a supply voltage of 3.3V, high efficiency is possible.Surface Mount is mounted in the way of this LED driving board.It has 140mOhm resistance.A component of this type is included in the IntelliMAX? series.In this case, the output current is set to 600mA.This LED driving board uses an analog IC POWER SUPPLY SUPPORT CIRCUIT.A total of 2 channels are available for you to choose from.Optimal efficiency requires a voltage of 5.5V.The maximum input voltage is 5.5V volts.It requires 1.8V volts as the minimum input voltage.600mA is the maximum current required to operate it.
FPF2312MPX Features
Supplied from 3.3V
Resistance of 140mOhm
2 channels
FPF2312MPX Applications
There are a lot of ON Semiconductor FPF2312MPX Power Switches ICs applications.
- Hot Swap
- Hot Swaps
- PC Cards
- Portable GPS
- Wireless Modem Data Cards
- USB Power Distribution
- Handheld Devices
- PC Card Hot Swap
- Smart Phones, Feature Phones
- Set-top-box
