FPF2313LMPX
| Parameters | |
|---|---|
| Lifecycle Status | LAST SHIPMENTS (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-WDFN Exposed Pad |
| Number of Pins | 8 |
| Weight | 129mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2010 |
| Series | IntelliMAX™ |
| JESD-609 Code | e4 |
| Feature | Load Discharge, Slew Rate Controlled |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 140mOhm |
| Terminal Finish | Nickel/Palladium/Gold/Silver (Ni/Pd/Au/Ag) |
| Max Power Dissipation | 2.2W |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Base Part Number | FPF2313 |
| Number of Outputs | 2 |
| Output Type | P-Channel |
| Max Output Current | 600mA |
| Operating Supply Voltage | 5.5V |
| Number of Channels | 2 |
| Interface | On/Off |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Output Configuration | High Side |
| Output Current | 600mA |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 600mA |
| Adjustable Threshold | NO |
| Input Type | Non-Inverting |
| Turn On Delay Time | 111 μs |
| Switch Type | General Purpose |
| Min Input Voltage | 1.8V |
| Max Input Voltage | 5.5V |
| Turn-Off Delay Time | 5 μs |
| Ratio - Input:Output | 1:2 |
| Voltage - Load | 1.8V~5.5V |
| Min Current Limit | 400mA |
| Fault Protection | Current Limiting (Adjustable), Over Temperature, UVLO |
| Rds On (Typ) | 75m Ω |
| Height | 750μm |
| Length | 3mm |
| Width | 3mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
FPF2313LMPX Overview
It is package in Tape & Reel (TR) case.It is included in the package 8-WDFN Exposed Pad.In this case, the LED driving board is mounted as Surface Mount.A General Purpose switch type is owned by it.The temperature should be set to -40°C~85°C TA to ensure reliable functioning.The LED driver has a total of 2 outputs.To operate, it needs a supply voltage of Not Required.A maximum output voltage of P-Channel volts can be achieved by this LED driver.Currently, the LED driving board is equipped with Load Discharge, Slew Rate Controlled features.It belongs to the family FPF2313.It has a total of 8 terminations.The 8 pins are used for the operation of the system.The LED driver has 1 functions.To comply with the operation criteria, the maximum output current is reduced to 600mA.A supply voltage of 3.3V leads to high efficiency.Surface Mount is mounted in the way of this lighting driver.140mOhm is the resistance of the lighting driver.These electrical components are part of the IntelliMAX? series.It is set to 600mA in this case.In this case, the analog IC in this gadget is POWER SUPPLY SUPPORT CIRCUIT.In total, there are 2 channels available.When using this LED driving board, it is recommended that the supply voltage is set to 5.5V.Voltage input is limited to 5.5V volts.There is a minimum input voltage of 1.8V volts for this LED driver.A maximum current requirement of 600mA is required for its operation.
FPF2313LMPX Features
Supplied from 3.3V
Resistance of 140mOhm
2 channels
FPF2313LMPX Applications
There are a lot of ON Semiconductor FPF2313LMPX Power Switches ICs applications.
- USB3.1 Power Delivery
- Various applications equipped with buttons
- USB Ports/Hubs
- USB Protection
- Portable GPS Device
- Hot Swap
- Hot Swaps
- Portable/Handheld Devices
- Mobile Communication Devices
- HDD and SSD
