FPF2313MPX
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 8-WDFN Exposed Pad |
| Number of Pins | 8 |
| Weight | 129mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2014 |
| Series | IntelliMAX™ |
| JESD-609 Code | e4 |
| Feature | Load Discharge, Slew Rate Controlled |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 140mOhm |
| Terminal Finish | Nickel/Palladium/Gold/Silver (Ni/Pd/Au/Ag) |
| Max Power Dissipation | 2.2W |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Current Rating | 600mA |
| Base Part Number | FPF2313 |
| Number of Outputs | 2 |
| Output Type | P-Channel |
| Operating Supply Voltage | 5.5V |
| Number of Channels | 2 |
| Interface | On/Off |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Output Configuration | High Side |
| Output Current | 600mA |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 600mA |
| Adjustable Threshold | NO |
| Input Type | Non-Inverting |
| Turn On Delay Time | 111 μs |
| Switch Type | General Purpose |
| Min Input Voltage | 1.8V |
| Max Input Voltage | 5.5V |
| Turn-Off Delay Time | 5 μs |
| Ratio - Input:Output | 1:2 |
| Voltage - Load | 1.8V~5.5V |
| Min Current Limit | 400mA |
| Fault Protection | Current Limiting (Adjustable), Over Temperature, UVLO |
| Rds On (Typ) | 75m Ω |
| Height | 750μm |
| Length | 3mm |
| Width | 3mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
| Lifecycle Status | LAST SHIPMENTS (Last Updated: 4 days ago) |
| Mount | Surface Mount |
FPF2313MPX Overview
It is package in Tape & Reel (TR) case.The 8-WDFN Exposed Pad package contains it.The lighting driver is mounted in the Surface Mount position.The switch type is General Purpose.It is recommended to set the temperature to -40°C~85°C TA in order to ensure reliable operation.The LED driver has 2 outputs.To operate, it needs a supply voltage of Not Required.It has a maximum output voltage of P-Channel volts.It has a total of Load Discharge, Slew Rate Controlled features.It belongs to the FPF2313 family.It contains 8 terminations.The operation is performed through the 8 pins.As far as the lighting driver is concerned, there are 1 functions.It is possible to obtain high efficiency with a supply voltage of 3.3V.It is mounted in the way of Surface Mount.140mOhm resistance is present in the lighting driver.This electrical component can be found in the IntelliMAX? series.This results in a 600mA output current.In this case, the analog IC in this gadget is POWER SUPPLY SUPPORT CIRCUIT.A total of 2 channels are available for you to choose from.When using this LED driving board, it is recommended that the supply voltage is set to 5.5V.A maximum input voltage of 5.5V volts can be applied to it.The input voltage minimum is 1.8V volts.For its operation, a maximum current requirement of 600mA is required.
FPF2313MPX Features
Supplied from 3.3V
Resistance of 140mOhm
2 channels
FPF2313MPX Applications
There are a lot of ON Semiconductor FPF2313MPX Power Switches ICs applications.
- Telecom and Network Systems
- USB Ports/Hubs
- PDAs
- Wireless Headsets
- Various applications equipped with buttons
- Notebook PC
- Handheld Devices
- PC Card Hot Swap
- Storage (HDDs, SSDs)
- Solid State Drivers
