Parameters |
Factory Lead Time |
1 Week |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
9-UFBGA, WLCSP |
Number of Pins |
9 |
Weight |
42mg |
Operating Temperature |
-40°C~85°C TA |
Packaging |
Tape & Reel (TR) |
Published |
2014 |
Series |
IntelliMAX™ |
JESD-609 Code |
e1 |
Feature |
Slew Rate Controlled, Status Flag |
Pbfree Code |
yes |
Part Status |
Not For New Designs |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
9 |
Resistance |
105mOhm |
Terminal Finish |
Tin/Silver/Copper (Sn/Ag/Cu) |
Subcategory |
Peripheral Drivers |
Max Power Dissipation |
1W |
Terminal Position |
BOTTOM |
Terminal Form |
BALL |
Number of Functions |
1 |
Supply Voltage |
5V |
Terminal Pitch |
0.4mm |
Base Part Number |
FPF2495 |
Number of Outputs |
1 |
Max Output Current |
2A |
Operating Supply Voltage |
5.5V |
Power Supplies |
3/5V |
Voltage |
5.5V |
Interface |
On/Off |
Current |
2A |
Output Configuration |
High Side |
Output Current |
1.5A |
Voltage - Supply (Vcc/Vdd) |
Not Required |
Max Supply Current |
100μA |
Input Type |
Non-Inverting |
Turn On Delay Time |
1.36 ms |
Switch Type |
General Purpose |
Min Input Voltage |
2.5V |
Max Input Voltage |
5.5V |
Nominal Input Voltage |
5.5V |
Turn-Off Delay Time |
230 μs |
Ratio - Input:Output |
1:1 |
Voltage - Load |
2.5V~5.5V |
Driver Number of Bits |
1 |
Min Current Limit |
100mA |
Fault Protection |
Current Limiting (Adjustable), Over Temperature, Over Voltage, Reverse Current, UVLO |
Output Peak Current Limit-Nom |
1A |
Rds On (Typ) |
70m Ω |
Built-in Protections |
OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
Height |
370μm |
Length |
1.21mm |
Width |
1.21mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
FPF2495UCX Overview
Tape & Reel (TR) is the way it's packaged.It's included in the 9-UFBGA, WLCSP package.Mounting type Surface Mount is selected for the LED driving board.General Purpose is the switch type it owns.The temperature should be set to -40°C~85°C TA to ensure reliable functioning.There is a default setting of 1 for output.It uses a supply voltage of Not Required to operate.Slew Rate Controlled, Status Flag features are available on the lighting driver.It is a member of the FPF2495 family.A total of 9 terminations have been found in it.For operation, we use the 9 pins.There are 1 functions of the LED driver.This results in the maximum output current dropping to 2A to meet the operation criteria.With a supply voltage of 5V, high efficiency is possible.Surface Mount is mounted in the way.Currently, the LED driving board has a resistance of 105mOhm ohms.This electrical component can be found in the IntelliMAX? series.The output current is set to 1.5A in this case.Self-contained LED driver with Peripheral Drivers capacity in an econtainer.This part is powered by 3/5V.In order to maximize efficiency, the supply voltage should be set to 5.5V.Voltage input is limited to 5.5V volts.As a minimum input voltage, it requires 2.5V volts.It requires a maximum current requirement of 100μA.
FPF2495UCX Features
Supplied from 5V
Resistance of 105mOhm
FPF2495UCX Applications
There are a lot of ON Semiconductor FPF2495UCX Power Switches ICs applications.
- HDD, SSD
- Various applications equipped with buttons
- Gaming
- USB Ports/Hubs
- Mobile Communication Devices
- Handheld Devices
- Hot Swaps
- USB Power Distribution
- Portable Music Players
- Notebook and Tablet Computers