FPF2496UCX
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 9-UFBGA, WLCSP |
| Number of Pins | 9 |
| Weight | 42mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2016 |
| Series | IntelliMAX™ |
| JESD-609 Code | e1 |
| Feature | Slew Rate Controlled, Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 9 |
| Resistance | 100mOhm |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Additional Feature | ALSO OPERATES WITH SUPPLY VOLTAGE 2.5 TO 5.5V |
| Subcategory | Peripheral Drivers |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.4mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Max Output Current | 2.5A |
| Operating Supply Voltage | 5.5V |
| Voltage | 5.5V |
| Interface | On/Off |
| Current | 2.5A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Switch Type | General Purpose |
| Min Input Voltage | 3.5V |
| Max Input Voltage | 5.5V |
| Nominal Input Voltage | 5.5V |
| Voltage - Load | 3.5V~5.5V |
| Driver Number of Bits | 1 |
| Min Current Limit | 100mA |
| Fault Protection | Current Limiting (Adjustable), Over Temperature, Over Voltage, Reverse Current, UVLO |
| Output Peak Current Limit-Nom | 1.5A |
| Rds On (Typ) | 100m Ω |
| Built-in Protections | OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
| Height | 370μm |
| Length | 1.21mm |
| Width | 1.21mm |
| RoHS Status | ROHS3 Compliant |
FPF2496UCX Overview
It's?packaged?in?the way?of?a?Tape & Reel (TR).There is a package for it in the 9-UFBGA, WLCSP package.The lighting driver has the mounting type Surface Mount.A General Purpose switch type is owned by it.Ensure reliable operation by setting the temperature to -40°C~85°C TA.As a default, the output is set to 1.It uses a supply voltage of Not Required to operate.It is equipped with Slew Rate Controlled, Status Flag features.It contains 9 terminations.For operation, 9 pins are used.Currently, the lighting driver has a total of 1 functions.As a result, the maximum output current is reduced to 2.5A in order to meet the operation requirements.A supply voltage of 5V leads to high efficiency.It is mounted in the way of Surface Mount.Currently, the LED driving board has a resistance of 100mOhm ohms.Electrical components such as this are included in the IntelliMAX? series.A self-contained container with a capacity of Peripheral Drivers contains this lighting driver.In order to achieve the best efficiency, the supply voltage should be set to 5.5V.The maximum input voltage of the LED driver is 5.5V volts.As far as input voltage goes, it has a minimum of 3.5V volts.With this LED driver, ALSO OPERATES WITH SUPPLY VOLTAGE 2.5 TO 5.5V can also be produced.
FPF2496UCX Features
Supplied from 5V
Resistance of 100mOhm
Additional features like ALSO OPERATES WITH SUPPLY VOLTAGE 2.5 TO 5.5V
FPF2496UCX Applications
There are a lot of ON Semiconductor FPF2496UCX Power Switches ICs applications.
- Wireless/Networking Cards
- Wireless Modem Data Cards
- Telecom and Network Systems
- Wireless Headsets
- PDAs
- Storage Drives
- Hot-Swap Systems
- Hot Swap
- Solid State Drivers
- USB Ports/Hubs
