FPF2498BUCX
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 6-UFBGA, WLCSP |
| Number of Pins | 6 |
| Weight | 45mg |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2016 |
| JESD-609 Code | e1 |
| Feature | Slew Rate Controlled, Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| ECCN Code | EAR99 |
| Resistance | 95mOhm |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Max Power Dissipation | 1W |
| Number of Outputs | 1 |
| Output Type | P-Channel |
| Max Output Current | 1.7A |
| Voltage | 12V |
| Interface | On/Off |
| Analog IC - Other Type | SPST |
| Current | 1.7A |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Turn On Delay Time | 7.3 ms |
| Switch Type | General Purpose |
| Min Input Voltage | 3.5V |
| Max Input Voltage | 12V |
| Turn-Off Delay Time | 2.5 ms |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 3.5V~12V |
| Fault Protection | Over Temperature, Over Voltage, Reverse Current, UVLO |
| Rds On (Typ) | 80m Ω |
| Height | 370μm |
| Length | 1.05mm |
| Width | 1.3mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
FPF2498BUCX Overview
As a result, it is packaged in the form of a Tape & Reel (TR).It is included with the 6-UFBGA, WLCSP package as well.A Surface Mount mounting is used for the LED driving board.It owns the General Purpose switch type.It is recommended that the temperature be set to -40°C~150°C TJ for reliable operation.In this LED driver, there are no outputs available.The LED driving board operates with a supply voltage of Not Required.There is a maximum output voltage of P-Channel volts.It has a total of Slew Rate Controlled, Status Flag features.For operation, 6 pins are used.The maximum output current must drop to 1.7A to meet the operation criteria.The lighting driver is mounted in the way of Surface Mount.The LED driver has 95mOhm resistance.The analog IC used in this lighting driver is SPST.The maximum input voltage is 12V volts.It requires 3.5V volts as the minimum input voltage.
FPF2498BUCX Features
Resistance of 95mOhm
FPF2498BUCX Applications
There are a lot of ON Semiconductor FPF2498BUCX Power Switches ICs applications.
- Portable GPS Device
- Wireless Headsets
- Hot-Swap Systems
- Set-top-box
- PC Card Hot Swap
- Smart Phones, Feature Phones
- Low Voltage I/O System Power
- Smartphone and PDA
- Storage Drives
- Portable Video Game Players
