banner_page

FPF2701MX

N-Channel PMIC AccuPower? Series FPF2701 8 Pin 12V 8-SOIC (0.154, 3.90mm Width)


  • Manufacturer: ON Semiconductor
  • Nocochips NO: 598-FPF2701MX
  • Package: 8-SOIC (0.154, 3.90mm Width)
  • Datasheet: PDF
  • Stock: 491
  • Description: N-Channel PMIC AccuPower? Series FPF2701 8 Pin 12V 8-SOIC (0.154, 3.90mm Width) (Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 4 days ago)
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 8-SOIC (0.154, 3.90mm Width)
Number of Pins 8
Weight 230.4mg
Operating Temperature -40°C~85°C TA
Packaging Tape & Reel (TR)
Published 2017
Series AccuPower™
JESD-609 Code e4
Feature Power Good, Slew Rate Controlled, Status Flag
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 8
ECCN Code EAR99
Resistance 88mOhm
Terminal Finish Nickel/Palladium/Gold/Silver (Ni/Pd/Au/Ag)
Subcategory Peripheral Drivers
Max Power Dissipation 1W
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) NOT SPECIFIED
Number of Functions 1
Supply Voltage 12V
Time@Peak Reflow Temperature-Max (s) NOT SPECIFIED
Base Part Number FPF2701
Number of Outputs 1
Qualification Status Not Qualified
Output Type N-Channel
Max Output Current 2A
Operating Supply Voltage 36V
Interface On/Off
Output Configuration High Side
Output Current 2A
Voltage - Supply (Vcc/Vdd) Not Required
Input Type Non-Inverting
Switch Type General Purpose
Min Input Voltage 2.8V
Max Input Voltage 36V
Nominal Input Voltage 36V
Ratio - Input:Output 1:1
Voltage - Load 2.8V~36V
Driver Number of Bits 1
Fault Protection Current Limiting (Adjustable), Over Temperature, UVLO
Output Peak Current Limit-Nom 0.4A
Rds On (Typ) 88m Ω
Built-in Protections OVER CURRENT; THERMAL; UNDER VOLTAGE
Height 1.575mm
Length 4.9mm
Width 3.9mm
REACH SVHC No SVHC
RoHS Status ROHS3 Compliant
Lead Free Lead Free
FPF2701MX Description


FPF2701MX MOSFET includes a slew rate-controlled N-channel MOSFET as well as a slew-rated turn- to stop power bus disruptions due to "hot plugging" loads or excessive load demands for a short period of time. The range of input voltage can be set from 2.8 V to 36 V. ON Semiconductor
FPF2701MX load are able to be switched off or on by using a low voltage logic compatible ON pin. The condition of the FPF2701MX circuit can be monitored by using an error-flag pin or the power-good port.


FPF2701MX Features


2.8 V to 36 V Input Voltage Range
Typical RDS(ON)=88 mΩ
0.4 A to 2 A Adjustable Current Limit (Min.)
Slew Rate Controlled
ESD Protected, Above 2000 V HBM
Thermal Shutdown
Active LOW Enable
UVLO Protection
Power-Good Output


FPF2701MX Applications


Media Tablets
Storage & Peripherals
Mobile Handsets
Wireless LAN Card & Broadband Access
PMP/MP3 Players

Write a review

Note: HTML is not translated!
    Bad           Good