FPF3003UCX
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-UFBGA, WLCSP |
| Number of Pins | 16 |
| Weight | 47mg |
| Packaging | Tape & Reel (TR) |
| Published | 2017 |
| Series | IntelliMAX™ |
| JESD-609 Code | e1 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Source Selector Switch |
| Resistance | 50mOhm |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Applications | Handheld/Mobile Devices |
| Additional Feature | LOBAT THRESHOLD VOLTAGE IS 0.8V |
| Voltage - Supply | 2.3V~5.5V |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 4.2V |
| Terminal Pitch | 0.4mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | FPF3003 |
| Number of Outputs | 2 |
| Operating Supply Voltage | 5.5V |
| Temperature Grade | INDUSTRIAL |
| Number of Channels | 1 |
| Voltage | 5.5V |
| Current | 2.5A |
| Adjustable Threshold | YES |
| Current - Supply | 30μA |
| Min Input Voltage | 2.3V |
| FET Type | P-Channel |
| Max Input Voltage | 5.5V |
| Ratio - Input:Output | 2:1 |
| Internal Switch(s) | Yes |
| Height | 370μm |
| Length | 1.56mm |
| Width | 1.56mm |
| RoHS Status | RoHS Compliant |
FPF3003UCX Overview
It comes in 16-UFBGA, WLCSP case. As a result, it is suitable for packing the part in the Tape & Reel (TR) case. Surface Mount is used to mount the part. We give it a voltage of 2.3V~5.5V. The component connected to Handheld/Mobile Devices is a good match for this component. The device is categorized as Source Selector Switch. A type of FET known as P-Channel is a type of FET that can be recognized by its symbol, which can be found on the package. 16 terminations are available in the part. Based on FPF3003, this part is manufactured. It is powered by 4.2V to deliver its perfomance. This part's peak reflow temperature is utilized to run NOT SPECIFIED. It is necessary to run the supply current of the part at 30μA in order to make it work. The part has 16 pins. The 2 outputs are available for use. As a rule of thumb, the best result is achieved when the part is mounted by the Surface Mount axis. It is possible to use the chip with voltages greater than 5.5V volts. The chip can be used with an input voltage of less than 2.3V V. In this case, we are dealing with a device from the IntelliMAX? series. With a supply voltage of 5.5V, this device can operate. When the temperature exceeds -40°C, the part should be used. When the temperature is below 85°C, the part should be used. 50mOhm is the range in which the device's resistance should remain.
FPF3003UCX Features
in a 16-UFBGA, WLCSP case
FET Type: P-Channel
16 terminations
Peak Reflow Temperature (Cel) : NOT SPECIFIED
2 outputs
operate supply voltage at 5.5V
FPF3003UCX Applications
There are a lot of ON Semiconductor FPF3003UCX Ideal Diode controller applications.
- Electricity meters
- Industrial transport
- Camera ECU
- ADAS domain controller
- Alternator
- Automotive battery protection
- Building automation
- Digital Cameras
- Power supply reverse polarity protection
- PCs
