FPF3040UCX
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-UFBGA, WLCSP |
| Number of Pins | 16 |
| Weight | 47mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2014 |
| Series | IntelliMAX™ |
| JESD-609 Code | e1 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Source Selector Switch |
| Resistance | 95mOhm |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Applications | Handheld/Mobile Devices |
| Max Power Dissipation | 2.25W |
| Voltage - Supply | 4V~10.5V |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.4mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | FPF3040 |
| Number of Outputs | 1 |
| Operating Supply Voltage | 10.5V |
| Number of Channels | 2 |
| Voltage | 10.5V |
| Nominal Supply Current | 55μA |
| Current | 2A |
| Max Supply Current | 55μA |
| Min Input Voltage | 4V |
| FET Type | N-Channel |
| Max Input Voltage | 10.5V |
| Ratio - Input:Output | 2:1 |
| Internal Switch(s) | Yes |
| Height | 370μm |
| Length | 1.6mm |
| Width | 1.6mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
FPF3040UCX Overview
A 16-UFBGA, WLCSP case is included. In Tape & Reel (TR) cases, it is convenient to pack the part. There is a Surface Mount-axis mounted on the part. With 4V~10.5V as its voltage, it is given a temperature of 0°C. There must not be a minimum operating temperature of -40°C~85°C for this component. It fits perfectly with the component connected to Handheld/Mobile Devices. As far as the device classification is concerned, it falls under the Source Selector Switch category. A type of FET known as N-Channel is a type of FET that can be recognized by its symbol, which can be found on the package. 16 terminations are available in the part in order to meet your needs. As you can see, this part is based on FPF3040. It is powered by 5V to deliver its perfomance. Run NOT SPECIFIED using this part's peak reflow temperature. The part has 16 pins. In addition, there are 1 outputs available for use. Surface Mount-mounting is recommended. An input voltage over 10.5V V can be used with this chip. Low input voltages of less than 4V volts will not damage the chip. In the IntelliMAX? series, this device is one of the most popular devices. It can be operated at 10.5V supply voltage. Keeping the device resistance within 95mOhm is recommended.
FPF3040UCX Features
in a 16-UFBGA, WLCSP case
FET Type: N-Channel
16 terminations
Peak Reflow Temperature (Cel) : NOT SPECIFIED
1 outputs
operate supply voltage at 10.5V
FPF3040UCX Applications
There are a lot of ON Semiconductor FPF3040UCX Ideal Diode controller applications.
- AC Rectifier
- Cell phones
- Power supply reverse polarity protection
- Power Tools
- Factory automation and control - PLC digital output modules
- Alternator
- Head Unit
- Digital Radios
- Industrial transport
- Active ORing for redundant power supplies
