banner_page

FS6377-01G-XTD

5V PLL Clock Generator 230MHz FS6377 Clock Generators 16 Pins 16-SOIC (0.154, 3.90mm Width) 16 Terminals Surface Mount 3V~5.5V Tube


  • Manufacturer: ON Semiconductor
  • Nocochips NO: 598-FS6377-01G-XTD
  • Package: 16-SOIC (0.154, 3.90mm Width)
  • Datasheet: PDF
  • Stock: 941
  • Description: 5V PLL Clock Generator 230MHz FS6377 Clock Generators 16 Pins 16-SOIC (0.154, 3.90mm Width) 16 Terminals Surface Mount 3V~5.5V Tube (Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 1 day ago)
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 16-SOIC (0.154, 3.90mm Width)
Number of Pins 16
Operating Temperature 0°C~70°C
Packaging Tube
Published 2005
JESD-609 Code e3
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 2 (1 Year)
Number of Terminations 16
ECCN Code EAR99
Type PLL Clock Generator
Terminal Finish Tin (Sn)
Subcategory Clock Generators
Voltage - Supply 3V~5.5V
Terminal Position DUAL
Terminal Form GULL WING
Supply Voltage 5V
Frequency 27MHz
Base Part Number FS6377
Output CMOS
Pin Count 16
Number of Outputs 4
Operating Supply Voltage 5V
Number of Elements 3
Interface I2C
Number of Circuits 1
Operating Supply Current 43mA
Nominal Supply Current 43mA
Max Supply Current 43mA
Frequency (Max) 230MHz
Halogen Free Halogen Free
Input Crystal
Ratio - Input:Output 1:4
Primary Clock/Crystal Frequency-Nom 27MHz
PLL Yes
Differential - Input:Output No/No
Divider/Multiplier Yes/No
Height 1.55mm
Length 9.98mm
Width 3.99mm
Radiation Hardening No
REACH SVHC No SVHC
RoHS Status ROHS3 Compliant
Lead Free Lead Free

FS6377-01G-XTD Overview


As a clock IC, PLLs is packaged using the Tube method. In the 16-SOIC (0.154, 3.90mm Width) package, there is an embedded clock generator. 16 terminations can be found in frequency generators. Clock generator ics require a voltage of 5V. It is designed that the Clock PLL's input should be Crystal. 1 circuits are implemented to access the electronic component's full performance. The frequency generator has a maximum frequency of 230MHz. This component can be conveniently installed on the panel thanks to the Surface Mount. There should be 3V~5.5V provided with this RF synthesizer. Test statistics estimate a temperature of 0°C~70°C, which should be set as the ambient temperature. CMOS is designed for clock generator's output. This electronic component can be classified as a PLL Clock Generator. The clock-generating IC is a 16-bit device designed specifically for microprocessors. These related electrical parts are available for the base part number FS6377. There are a number of 16 pins that are available on the frequency synthesizers. The maximum supply voltage that clock generator can handle is 5V. Clock Generators-type frequency generators are usually classified as this type. 4 signal outputs are provided for enhancing output frequency as much as possible. At a frequency of 27MHz, the system can achieve high efficiency. The supply current of 43mA needs to be provided to fully play clock generator's function. The clock PLL here has 3 elements and has a very low jitter performance. This clock generator operation can supply up to 43mA of current.

FS6377-01G-XTD Features


Available in the 16-SOIC (0.154, 3.90mm Width)
Supply voltage of 5V
Operating supply voltage of 5V

FS6377-01G-XTD Applications


There are a lot of ON Semiconductor FS6377-01G-XTD Clock Generators applications.

  • Cell phones
  • 1 Gigabit Ethernet
  • FSK demodulators
  • Broadcast communication
  • FM demodulation networks for FM operations
  • CB radios
  • Laptops
  • Bit synchronization
  • Satellite receivers
  • Carrier synchronization in wired communication

Write a review

Note: HTML is not translated!
    Bad           Good