FSA1156L6X
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Number of Pins | 6 |
| Weight | 30g |
| Packaging | Tape & Reel (TR) |
| Published | 2005 |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Resistance | 900mOhm |
| Terminal Finish | Nickel/Gold (Ni/Au) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | Multiplexer or Switches |
| Max Power Dissipation | 180mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 2.7V |
| Terminal Pitch | 0.5mm |
| Temperature Grade | INDUSTRIAL |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.65V |
| Nominal Supply Current | 100nA |
| Max Supply Current | 500nA |
| Throw Configuration | SPST |
| Turn On Delay Time | 30 ns |
| Number of Inputs | 1 |
| Supply Type | Single |
| Turn-Off Delay Time | 25 ns |
| On-state Resistance Match-Nom | 0.6Ohm |
| Switch-on Time-Max | 40ns |
| Normal Position | NO |
| Height | 500μm |
| Length | 1.45mm |
| Width | 1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
FSA1156L6X Overview
The advanced packaging method Tape & Reel (TR) provides high reliability. A total of 6 terminations have been recorded. A high-quality output is provided by the electrical component's 1 channels. If the voltage supply is 2.7V volts, the electrical component should be turned on and run. In this multiplexer, the internal resistance is 900mOhm. For details about the functions of 6 pins, please refer to the datasheets. This switch device is a typical Multiplexer or Switches. In normalcircumstances, users should not exceed 5.5V volts for the multiplexer. A analog switch ic that has a cost-effective Single supply type. The lowest voltage fed to the electronic component should be 1.65V. Putting voltage greater than 500nA on the multiplexer may cause damage. There are 1 inputs to be operated. The switches should not operate in an environment where the temperature is higher than 85°C.
FSA1156L6X Features
1 Channels
FSA1156L6X Applications
There are a lot of ON Semiconductor FSA1156L6X Analog Switches & Multiplexers ICs applications.
- Communication systems
- High speed data transmission line cards
- Automatic test equipment
- 65 V DACs
- Channelized and Unchannelized DS3 applications
- Intelligent PBX
- Sample-and-hold systems
- PBX interfaces
- Cable Telephony – NIU, Set-Top Box, Home Side Box
- Battery Powered Instruments
