FSA1156P6
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 6-TSSOP, SC-88, SOT-363 |
| Number of Pins | 6 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Resistance | 900mOhm |
| Terminal Finish | Tin (Sn) |
| Subcategory | Multiplexer or Switches |
| Max Power Dissipation | 180mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 2.7V |
| Base Part Number | FSA1156 |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.65V |
| Nominal Supply Current | 100nA |
| Power Dissipation | 180mW |
| Max Supply Current | 500nA |
| Throw Configuration | SPST |
| Turn On Delay Time | 30 ns |
| Supply Type | Single |
| Turn-Off Delay Time | 25 ns |
| -3db Bandwidth | 300MHz |
| On-State Resistance (Max) | 900mOhm |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Current - Leakage (IS(off)) (Max) | 2nA |
| Channel Capacitance (CS(off), CD(off)) | 20pF |
| Switch Circuit | SPST - NO |
| Switch Time (Ton, Toff) (Max) | 20ns, 30ns |
| Charge Injection | 20pC |
| Switch-on Time-Max | 40ns |
| Voltage - Supply, Single (V+) | 1.65V~5.5V |
| Normal Position | NO |
| Height | 1mm |
| Length | 2mm |
| Width | 1.25mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
FSA1156P6 Overview
Presented in 6-TSSOP, SC-88, SOT-363, this electrical component is convenient for overseas shipping. High reliability is achieved by using advanced packaging method Tape & Reel (TR). A switch device like this is mounted in Surface Mount. The ratio between the number of multiplexer and demultiplexer circuits is 1:1. An extended operating temperature of -40°C~85°C TA degrees Celsius. There are 6 terminations totally. As a result of its 1 channels, this electronic component provides high-quality output. With a 2.7V voltage supply, the electrical component should be turned on and run. Unlike digital switches, these are based on SPST - NO switching circuits. If you are looking for variants of the digital switch, trying search with FSA1156. In this multiplexer, the internal resistance is 900mOhm. The datasheets for the 6 pins explain the functions. Theswitch device is a typical Multiplexer or Switches. An abnormal situation would be for the switch device to be supplied with a voltage greater than 5.5V. Analogue multiplexer with a Single supply type that is cost-effective. A low voltage of 1.65V should be applied to the electronic component. Draining from a single voltage supply, this analog switch requires a voltage of 1.65V~5.5V. Put voltage above 500nA on the multiplexer to cause damage.
FSA1156P6 Features
1 Channels
Switch Circuit: SPST - NO
-3db Bandwidth: 300MHz
FSA1156P6 Applications
There are a lot of ON Semiconductor FSA1156P6 Analog Switches & Multiplexers ICs applications.
- SDH/SONET multiplexers
- Battery Powered Instruments
- PDH Multiplexers
- Ultrasound
- Avionics and Military Systems
- Imaging
- Access Concentrators
- Battery-powered systems
- E1 Multiplexer
- DSLAMs
