FSA1157L6X
| Parameters | |
|---|---|
| Lifecycle Status | LIFETIME (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 6-UFDFN |
| Number of Pins | 6 |
| Weight | 30g |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2005 |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Resistance | 900mOhm |
| Terminal Finish | Gold/Nickel (Au/Ni) |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 2.7V |
| Terminal Pitch | 0.5mm |
| Base Part Number | FSA1157 |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.65V |
| Nominal Supply Current | 100nA |
| Max Supply Current | 500nA |
| Throw Configuration | SPST |
| Turn On Delay Time | 30 ns |
| Supply Type | Single |
| Turn-Off Delay Time | 25 ns |
| -3db Bandwidth | 300MHz |
| On-State Resistance (Max) | 900mOhm |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Current - Leakage (IS(off)) (Max) | 2nA |
| Channel Capacitance (CS(off), CD(off)) | 20pF |
| On-state Resistance Match-Nom | 0.6Ohm |
| Switch Circuit | SPST - NC |
| Switch Time (Ton, Toff) (Max) | 20ns, 30ns |
| Charge Injection | 20pC |
| Switch-on Time-Max | 40ns |
| Voltage - Supply, Single (V+) | 1.65V~5.5V |
| Normal Position | NC |
| Height | 500μm |
| Length | 1.45mm |
| Width | 1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
FSA1157L6X Overview
As the electronic part is packed in 6-UFDFN, international shipping is convenient. A high level of reliability can be achieved through the use of an advanced packaging method Tape & Reel (TR). It is mounted in the position Surface Mount. Multiplexers and demultiplexers have a ratio of 1:1. Extended operating temperature around -40°C~85°C TA. The total number of terminations is 6. A high-quality output is provided by the electrical component's 1 channels. A 2.7V voltage supply should turn on and run the electronic component. The analog switch ics are built using SPST - NC switching circuits. Look for analog switch ic variants by searching with FSA1157. In this multiplexer, the internal resistance is 900mOhm. To find out what the 6 pins do, please refer to the datasheets. There is a standard Multiplexer or Switches analogue multiplexer here. In normalcircumstances, users should not exceed 5.5V volts for the multiplexer. The analog switch ic is of the Single supply type and is cost-effective. It is recommended to use 1.65V as the lowest voltage for the electrical part. Draining from a single voltage supply, this analog switch requires a voltage of 1.65V~5.5V. The analogue multiplexer may be damaged if voltage is greater than 500nA.
FSA1157L6X Features
1 Channels
Switch Circuit: SPST - NC
-3db Bandwidth: 300MHz
FSA1157L6X Applications
There are a lot of ON Semiconductor FSA1157L6X Analog Switches & Multiplexers ICs applications.
- MP3 players
- RGB switches
- Transmit
- Avionics
- Voice over IP/DSL – Integrated Access Devices, Smart
- Digital access cross connects
- Channel Banks
- Industrial and process control systems
- Sample hold systems
- Medical systems
