FSA1157P6
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 6-TSSOP, SC-88, SOT-363 |
| Number of Pins | 6 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Resistance | 900mOhm |
| Terminal Finish | Tin (Sn) |
| Subcategory | Multiplexer or Switches |
| Max Power Dissipation | 180mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 2.7V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | FSA1157 |
| Qualification Status | Not Qualified |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.65V |
| Nominal Supply Current | 100nA |
| Max Supply Current | 500nA |
| Throw Configuration | SPST |
| Turn On Delay Time | 30 ns |
| Supply Type | Single |
| Bandwidth | 300MHz |
| Turn-Off Delay Time | 25 ns |
| On-State Resistance (Max) | 900mOhm |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Current - Leakage (IS(off)) (Max) | 2nA |
| Channel Capacitance (CS(off), CD(off)) | 20pF |
| Switch Circuit | SPST - NC |
| Switch Time (Ton, Toff) (Max) | 20ns, 30ns |
| Charge Injection | 20pC |
| Switch-on Time-Max | 40ns |
| Voltage - Supply, Single (V+) | 1.65V~5.5V |
| Normal Position | NC |
| Length | 2mm |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
FSA1157P6 Overview
Shipping overseas is convenient with the electronic component packed in 6-TSSOP, SC-88, SOT-363. High reliability is provided by advanced packaging method Tape & Reel (TR). In Surface Mount, this analog switch is mounted. Multiplexer and demultiplexer circuits have a number 1:1. Operation at a temperature around -40°C~85°C TA. In total, 6 terminations have occurred. A 1 channel electronic part produces high-quality output. With a 2.7V voltage supply, the electrical component should be turned on and run. Unlike digital switches, these are based on SPST - NC switching circuits. Look for analog switch ic variants by searching with FSA1157. An switch multiplexer with 900mOhm internal resistance has a value of 900mOhm. The datasheets for the 6 pins explain the functions. There is Multiplexer or Switches analog multiplexer like this in the world. A voltage higher than 5.5V should not normally be supplied to the switches. A cost-effective Single supply type analogue multiplexer. There should be 1.65V voltage fed to the electrical part below 1.65V. The voltage required by this switch device is 1.65V~5.5V, draining from a single voltage supply. When the digital multiplexer is charged above 500nA, damage can occur. 300MHz-bandwidths can be used to transfer data between multiplexers.
FSA1157P6 Features
1 Channels
Switch Circuit: SPST - NC
Bandwidth: 300MHz
FSA1157P6 Applications
There are a lot of ON Semiconductor FSA1157P6 Analog Switches & Multiplexers ICs applications.
- Multi-Line E1 Interface Cards
- Cable Telephony – NIU, Set-Top Box, Home Side Box
- Automotive applications
- HDTV
- Industrial and process control systems
- FTTH
- Precision data acquisition
- Audio/video switches
- E1 Network Equipment
- Medical
