FSA2156L6X
| Parameters | |
|---|---|
| Lifecycle Status | LAST SHIPMENTS (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 6-UFDFN |
| Number of Pins | 6 |
| Weight | 30g |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2016 |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Resistance | 360mOhm |
| Terminal Finish | Nickel/Gold (Ni/Au) |
| Subcategory | Multiplexer or Switches |
| Max Power Dissipation | 180mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 2.3V |
| Terminal Pitch | 0.5mm |
| Base Part Number | FSA2156 |
| Output | SEPARATE OUTPUT |
| Operating Supply Voltage | 3V |
| Number of Channels | 1 |
| Max Supply Voltage | 4.3V |
| Min Supply Voltage | 3V |
| Nominal Supply Current | 30nA |
| Throw Configuration | SPST |
| Turn On Delay Time | 65 ns |
| Supply Type | Single |
| Bandwidth | 80MHz |
| Turn-Off Delay Time | 75 ns |
| On-State Resistance (Max) | 360mOhm Typ |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Off-state Isolation-Nom | 65 dB |
| Current - Leakage (IS(off)) (Max) | 10nA |
| Channel Capacitance (CS(off), CD(off)) | 38pF |
| Switch Circuit | SPST - NO |
| Switch Time (Ton, Toff) (Max) | 55ns, 65ns |
| Charge Injection | 6pC |
| Switching | MAKE-BEFORE-BREAK |
| Switch-on Time-Max | 70ns |
| Switch-off Time-Max | 80ns |
| Voltage - Supply, Single (V+) | 1.65V~4.3V |
| Drain to Source Resistance | 700mOhm |
| Height Seated (Max) | 0.55mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
FSA2156L6X Overview
The electrical component comes in 6-UFDFN packaging, which makes it convenient to ship overseas. High reliability is provided by advanced packaging method Tape & Reel (TR). A switch device like this is mounted in Surface Mount. In the multiplexer and demultiplexer, 1:1 represents the number of circuits. Around -40°C~85°C TA is the extended operating temperature. Totally, there are 6 terminations. A 1 channel electronic part produces high-quality output. It is safe to turn on and run the electronic component with a 2.3V voltage supply. A SPST - NO switching circuit is used for these analog switches. Use FSA2156 to search for variants of the digital switches. As far as internal resistance is concerned, it has 360mOhm. You can find the functions of the 6 pins in the datasheets. In this analog multiplexer, the value is Multiplexer or Switches. normally, users should not supply switches with voltages higher than 4.3V. An effective Single supply digital multiplexer. The lowest voltage the electronic part should receive is 3V. An analogue multiplexer drains from a single voltage supply at 1.65V~4.3V. There are SEPARATE OUTPUT outputs on this analog switch ic. The electrical part can be operated at 3V voltage levels. This switch operates within the bandwidth of 80MHz. A Drain to Source resistance of 700mOhm is shown for this electronic part.
FSA2156L6X Features
1 Channels
Switch Circuit: SPST - NO
Bandwidth: 80MHz
Drain-to-Source resistance: 700mOhm
FSA2156L6X Applications
There are a lot of ON Semiconductor FSA2156L6X Analog Switches & Multiplexers ICs applications.
- Fiber to the Home
- E1 Network Equipment
- Existing multiplexer applications (both fault-protected and nonfault-protected)
- Battery Powered Systems
- Multiplexers
- Public switching systems
- PBX interfaces
- PCMCIA cards
- Communication systems
- Communication systems
