FSA2156P6
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 6-TSSOP, SC-88, SOT-363 |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| Terminal Finish | MATTE TIN |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.3V |
| Terminal Pitch | 0.65mm |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 6 |
| JESD-30 Code | R-PDSO-G6 |
| Supply Voltage-Max (Vsup) | 4.3V |
| Number of Channels | 1 |
| Number of Circuits | 1 |
| -3db Bandwidth | 80MHz |
| On-State Resistance (Max) | 360mOhm Typ |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Off-state Isolation-Nom | 65 dB |
| Current - Leakage (IS(off)) (Max) | 10nA |
| Channel Capacitance (CS(off), CD(off)) | 38pF |
| Switch Circuit | SPST - NO |
| Switch Time (Ton, Toff) (Max) | 55ns, 65ns |
| Charge Injection | 6pC |
| Switch-on Time-Max | 65ns |
| Switch-off Time-Max | 75ns |
| Voltage - Supply, Single (V+) | 1.65V~4.3V |
| Length | 2mm |
| RoHS Status | ROHS3 Compliant |
FSA2156P6 Overview
The electronic component is convenient to ship overseas because it is packed in a 6-TSSOP, SC-88, SOT-363. In order to provide high reliability, an advanced packaging method Tape & Reel (TR) is used. Multiplexers like this are mounted in the Surface Mount position. Multiplexers and demultiplexers have a ratio of 1:1. Operating temperature around -40°C~85°C TA extended. The total number of terminations is 6. A electrical component with 1 channels is capable of high-quality output. Powered by a 2.3V voltage supply, the electrical part should be switched on and run. As part of the design of the 6 series, this electronic part has been incorporated into the system. A SPST - NO switching circuit is used for these analog switches. There are 1 circuits in this switch device. A voltage of 1.65V~4.3V is required for this switch device, which drains from a single voltage source.
FSA2156P6 Features
1 Channels
Switch Circuit: SPST - NO
-3db Bandwidth: 80MHz
FSA2156P6 Applications
There are a lot of Rochester Electronics, LLC FSA2156P6 Analog Switches & Multiplexers ICs applications.
- ADCs such as AD7840/8, AD7870/1/2/4/5/6/8
- Cell phones
- DVD-R
- PDAs
- Industrial and process control systems
- T1/E1 Terminals
- Automotive applications
- Optical Applications
- Short/Medium Loop: approximately 2000 ft. of 26 AWG and 5 REN loads
- Audio signal routing
