FSA2156P6X
| Parameters | |
|---|---|
| Terminal Pitch | 0.65mm |
| Base Part Number | FSA2156 |
| Output | SEPARATE OUTPUT |
| JESD-30 Code | R-PDSO-G6 |
| Operating Supply Voltage | 3V |
| Number of Channels | 1 |
| Max Supply Voltage | 4.3V |
| Min Supply Voltage | 3V |
| Power Dissipation | 180mW |
| Throw Configuration | SPST |
| Turn On Delay Time | 65 ns |
| Supply Type | Single |
| Bandwidth | 80MHz |
| Turn-Off Delay Time | 75 ns |
| On-State Resistance (Max) | 360mOhm Typ |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Off-state Isolation-Nom | 65 dB |
| Current - Leakage (IS(off)) (Max) | 10nA |
| Channel Capacitance (CS(off), CD(off)) | 38pF |
| Switch Circuit | SPST - NO |
| Switch Time (Ton, Toff) (Max) | 55ns, 65ns |
| Charge Injection | 6pC |
| Switching | MAKE-BEFORE-BREAK |
| Switch-off Time-Max | 80ns |
| Voltage - Supply, Single (V+) | 1.65V~4.3V |
| Drain to Source Resistance | 700mOhm |
| Length | 2mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | LAST SHIPMENTS (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 6-TSSOP, SC-88, SOT-363 |
| Number of Pins | 70 |
| Weight | 28mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2016 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Resistance | 360mOhm |
| Subcategory | Multiplexer or Switches |
| Max Power Dissipation | 180mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 2.3V |
FSA2156P6X Overview
Shipping overseas is convenient due to the electrical component's packing in 6-TSSOP, SC-88, SOT-363. High reliability is achieved by using advanced packaging method Tape & Reel (TR). In Surface Mount, you'll find this switch device. Multiplexer and demultiplexer circuits have a number 1:1. Operational temperature extended around -40°C~85°C TA. 6 terminations have been made so far. As a result of its 1 channels, this electronic component provides high-quality output. Powered by a 2.3V voltage supply, the electrical part should be switched on and run. A SPST - NO switching circuit is used to build these analog multiplexers. Search with FSA2156 if you are looking for analog multiplexer variants. As far as internal resistance is concerned, it has 360mOhm. The datasheets for the 70 pins explain the functions. This switch device is a typical Multiplexer or Switches. In a normalsituation, users should not supply the switches with voltage higher than 4.3V. A cost-effective Single supply type analogue multiplexer. 3V is the lowest voltage the electrical component should receive. Draining from a single voltage supply, this analog switch requires a voltage of 1.65V~4.3V. A total of SEPARATE OUTPUT outputs are available on this analog switch ic. The electronic component can function from 3V. There are 80MHz bandwidths for data transfer. There is 700mOhm resistance between Drain and Source for this electronic part.
FSA2156P6X Features
1 Channels
Switch Circuit: SPST - NO
Bandwidth: 80MHz
Drain-to-Source resistance: 700mOhm
FSA2156P6X Applications
There are a lot of ON Semiconductor FSA2156P6X Analog Switches & Multiplexers ICs applications.
- Fiber to the Home
- Short/Medium Loop: approximately 2000 ft. of 26 AWG and 5 REN loads
- Precision instrumentation
- Cable Modem
- Sample-and-hold systems
- Multi-Line E1 Interface Cards
- Central office
- Communication systems
- Medical systems
- Imaging
