FSA2257L10X
| Parameters | |
|---|---|
| Turn On Delay Time | 50 ns |
| Supply Type | Single |
| Bandwidth | 350MHz |
| Nominal Input Voltage | 5.5V |
| Turn-Off Delay Time | 20 ns |
| -3db Bandwidth | 200MHz |
| On-State Resistance (Max) | 1.15Ohm |
| Multiplexer/Demultiplexer Circuit | 2:1 |
| Off-state Isolation-Nom | 70 dB |
| Current - Leakage (IS(off)) (Max) | 2nA |
| Channel Capacitance (CS(off), CD(off)) | 12pF |
| On-state Resistance Match-Nom | 0.06Ohm |
| Switch Circuit | SPDT |
| Switch Time (Ton, Toff) (Max) | 35ns, 15ns |
| Charge Injection | 10pC |
| Channel-to-Channel Matching (ΔRon) | 60m Ω |
| Crosstalk | -75dB @ 1MHz |
| Switching | BREAK-BEFORE-MAKE |
| Voltage - Supply, Single (V+) | 1.65V~5.5V |
| Height | 500μm |
| Length | 2.1mm |
| Width | 1.6mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-UFQFN Exposed Pad |
| Number of Pins | 10 |
| Weight | 22mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2016 |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Resistance | 1.15Ohm |
| Terminal Finish | Nickel/Gold (Ni/Au) |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Position | QUAD |
| Number of Functions | 2 |
| Supply Voltage | 2.7V |
| Terminal Pitch | 0.5mm |
| Base Part Number | FSA2257 |
| Number of Outputs | 4 |
| Power Supplies | 1.8/5V |
| Number of Channels | 2 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.65V |
| Nominal Supply Current | 100nA |
| Max Supply Current | 500nA |
FSA2257L10X Overview
Presented in 10-UFQFN Exposed Pad, this electrical component is convenient for overseas shipping. High reliability is provided by advanced packaging method Tape & Reel (TR). Surface Mount is where this multiplexer is located. Multiplexers and demultiplexers have a ratio of 2:1. Operating temperature extended to -40°C~85°C TA. The total number of terminations is 10. The electronic part delivers high-quality output through its 2 channels. An 2.7V voltage supply should allow the electrical part to be turned on and run. SPDT switching circuits are used in these analog switch ics. Using the FSA2257 search parameter, you can discover variants of the switch. Internally, this switch multiplexer has a resistance of 1.15Ohm. For details about the functions of 10 pins, please refer to the datasheets. The analogue multiplexer in this example is a typical Multiplexer or Switches. Users should never supply a voltage higher than 5.5V to a switch device. Digital switch that provides Single power at a cost-effective price. A low voltage of 1.65V should be applied to the electronic component. Analogue multiplexers require a 1.65V~5.5V voltage to drain from a single voltage supply. The analogue multiplexer may be damaged if voltage is greater than 500nA. The transfer of data can be performed over 350MHz bandwidths. The analog switch ics includes 4 outputs.
FSA2257L10X Features
2 Channels
Switch Circuit: SPDT
-3db Bandwidth: 200MHz
Bandwidth: 350MHz
FSA2257L10X Applications
There are a lot of ON Semiconductor FSA2257L10X Analog Switches & Multiplexers ICs applications.
- Existing multiplexer applications (both fault-protected and nonfault-protected)
- Switching Systems
- Ultrasound
- Automotive applications
- Microwave transmission systems
- Battery Powered Systems
- Fiber In The Loop (FITL)
- DVD-R
- Cellular phones
- Remote Powered Equipment
